Don't like the adverts?  Click here to remove them

1HZ, 1HD-T, 1HD-FT sticking starter fix

Rob

Well-Known Member
Joined
Mar 1, 2010
Messages
3,019
Garage
If you starter is sticking, i.e. the strater keeps on turning over after you release the ignition key from the strating position, you can easily fix it by replacing the contacts and plunger. This is a common fault and the condition of the contacts should be checked before you take your Landcruiser on an overland trip.

You will need the following parts form Toyota:
Starter Kit: 28226-54320 (28226-17030 can also be used for the 24valve 1HD-FT)
Strater Kit: 28226-54220
Magnet switch plunger: 28235-17030

Total cost of the parts needed is around £50.

There is an guide here: http://www.hiluxsurf.co.uk/showthread.php?t=51979
 
Last edited:
I paid £15 for a repair kit for mine from here (see my thread here). The kit is of good quality and the guy was very helpful, just send him the part number off your starter motor and he'll send the correct kit. :icon-cool:
 
Think we posted at the same time Chas! As they say "great minds think alike" :lol:
 
Don't like the adverts?  Click here to remove them
Back
Top