Rob
Well-Known Member
Carring on from http://www.landcruiserclub.net/forum/viewtopic.php?f=43&t=6929&start=10
I have come to the conclusion that i have everything i need to mount my winch. All i need know now is how to fit it.
Here is the diagram from the manual:
According to the diagram the red goes to power steering pump and green goes to the box.
Do i replace the original banjo with the new one on the pump and box or do i keep the original pipie and mount the new one on top? The streeing valve seems to be missing from the diagram above so would i need to plug it in somewhere else? I know where the PS pump connection goes as the guy who i bought i from pointed it out but i don't have a clue where the right connection is for the other pipe.
Will i need to completely drain the PS system before installing? Do i need to bleed the pipes in a specific way?
Can i use cheap DEXRON II to fill it?
Also i assume it runs on 12 volts not 24 volts as in the diagram, i would need a 30 amp fuse right?
Anything else i should know?
I have come to the conclusion that i have everything i need to mount my winch. All i need know now is how to fit it.
Here is the diagram from the manual:
According to the diagram the red goes to power steering pump and green goes to the box.
Do i replace the original banjo with the new one on the pump and box or do i keep the original pipie and mount the new one on top? The streeing valve seems to be missing from the diagram above so would i need to plug it in somewhere else? I know where the PS pump connection goes as the guy who i bought i from pointed it out but i don't have a clue where the right connection is for the other pipe.
Will i need to completely drain the PS system before installing? Do i need to bleed the pipes in a specific way?
Can i use cheap DEXRON II to fill it?
Also i assume it runs on 12 volts not 24 volts as in the diagram, i would need a 30 amp fuse right?
Anything else i should know?