Don't like the adverts?  Click here to remove them

Pulley wheel

G

Guest

Guest
Hi Julian,
I have tried sending this to you at home but am getting back an
undeliverable message.
I don't know why but my brakes seem to be a bit better, they still pull
right and judder at the pedal, but not as much as they used to.
Do you remember my top fan belt pulley wheel that was squeaking? well now it
has seized solid and won't turn, so it's an expensive trip to Toyota for me
for a new one (?71+). I've tried a few breakers, but no-one has been able to
help. The Cruiser has been sitting in the garage getting cold for a while
now, and I am getting withdrawal symptoms.
Happy New Year to you and the enlarged family
Regards
Chas
 
Hi Chas,
Sorry to hear about the pulley - one day I will try to track a source for the bearings - they are a common issue.
Re the bounced emails, please could you forward copies of the bounce messages you received to [Email address removed] and also CC it to [Email address removed].
Many thanks.
Regards,
Julian Voelcker
07971 540362
[Email address removed]
 
Chas, don't forget the pulley is only for the aircon, which I am sure you can do without at this time of year so there is no reason for the car to be confined to barracks.
Regards,
Julian Voelcker
07971 540362
[Email address removed]
 
Hi All
Does anybody know where I can obtain an idler pulley wheel that adjusts the
belt driving the aircon pump, the bearing on mine has seized, it's the
highest one on the front of the HDT 80 engine just to the right of the
aircon pump, Toyota want ?71+ for one, Milner don't do them I've tried
breakers in my area but none have been able to help.
TTFN
Chas
London UK '94 1HDT 80 Auto, 110000+ miles, Safari snorkel, Custom Winch
bumper + winch, + Ray Dadd Rocksliders
 
Cheers Jon,
I've been to Toyota today and ordered one but it won't be in 'til Friday and
it's not paid for yet so I could always cancel it.
Chas
----- Original Message -----
From: "Jon Wildsmith" <[Email address removed]>
To: <[Email address removed]>
Sent: Wednesday, January 02, 2008 5:27 PM
Subject: Re: [ELCO] Pulley wheel
 
Hi Jon,
Thanks anyway, it was worth a try. If I used yours I would probably be
getting another one sooner or later.
Chas
----- Original Message -----
From: "Jon Wildsmith" <[Email address removed]>
To: <[Email address removed]>
Sent: Wednesday, January 02, 2008 7:54 PM
Subject: Re: [ELCO] Pulley wheel
 
Don't like the adverts?  Click here to remove them
Back
Top