Hello all, I have just registered and this is my first thread.
I bought a 1984 60 series Sahara a few months ago for a good deal. The engine needed work but everything else was in great condition. Due to time restraints, I ended up replacing the motor rather than rebuilding the original one with a rebuilt exchange from a supplier in Victoria and I'm happy to say that the vehicle is now run in at 1200kms and running great with just a few minor exceptions.
I have driven these vehicles before so I knew what sort of power to expect, but mine seems to be a bit more sluggish than I'd hoped. I'm yet to fully adjust the fuel timing which will help, but I was wondering about an aftermarket turbo. I know that as the engine is new it should maintain reliability if I install an aftermarket turbo, but any experiences that other club members have had regarding this would be much appreciated. What is the max psi allowable with a stock 2h? Is it 5psi?
I've also found a 12ht for sale but as I have just bought and installed a rebuilt 2h I'd rather not have to buy another motor although I know the 12ht has legendary status.
Also, any advice anyone has regarding parts suppliers would be great as there are a few mainly cosmetic items that I require. Thanks in advance for your help.
David.
I bought a 1984 60 series Sahara a few months ago for a good deal. The engine needed work but everything else was in great condition. Due to time restraints, I ended up replacing the motor rather than rebuilding the original one with a rebuilt exchange from a supplier in Victoria and I'm happy to say that the vehicle is now run in at 1200kms and running great with just a few minor exceptions.
I have driven these vehicles before so I knew what sort of power to expect, but mine seems to be a bit more sluggish than I'd hoped. I'm yet to fully adjust the fuel timing which will help, but I was wondering about an aftermarket turbo. I know that as the engine is new it should maintain reliability if I install an aftermarket turbo, but any experiences that other club members have had regarding this would be much appreciated. What is the max psi allowable with a stock 2h? Is it 5psi?
I've also found a 12ht for sale but as I have just bought and installed a rebuilt 2h I'd rather not have to buy another motor although I know the 12ht has legendary status.
Also, any advice anyone has regarding parts suppliers would be great as there are a few mainly cosmetic items that I require. Thanks in advance for your help.
David.