Recent content by Pedders01

Thats a good price if its done properly. Try to make sure you get a printout. As Shayne said, the oversteer issue would suggest a possible issue with the location of the rear axle. Id strongly suggest you identify this issue prior to your alignment.

Yes, this is correct. BUT, to do the alignment properly you would be referencing the thrust angle of the rear axle, so would need to know what it is. Without that, you may find despite adjustment, that your steering wheel is not centered. Tracking (toe angle) out, inaccurate castor, or possibly...

That sounds like a great trip :) Excellent write up. On a slightly more selfish note, can i ask, how was the suspension?

I have double checked this with my collegues in Oz. Starting from the bottom, the boot with its integral washer on first, then the large flat washer. Followed by the mount. Once thats on, the top smaller rubber, then the smaller dished washer, dish facring down. That will of course render an...

Will let you know, hopefully tommorow,

Thats us :)

If you really get stuck, you can send them here. Our machine will definitely do it :)

Good to hear its all fitted and working. But yes, i think you should ask. Currently you have no effective bump stop fitted at the rear which is not ideal. I cant quite make out what he means from your description, but the instructions have the details on what should be done. Please let me know...

So is the air bag side of things still OK?

Yes, they are the standard height front springs. As i said, id expect yours to be lower given the additional weight. But ours will be a touch stiffer than the original Toyota ones, so you will back to where you were prior to spring failure plus a few milimeters . No need for bushes unless they...

Hi Raffles We do actually quote an installed height for springs on a standard vehicle. That said, looking at your photo you do have one or 2 extras attached to the front :) This will affect the final height, but if they are standard on there now, and you fitted our standard height springs...