Search results

In case anyone else was wondering, I knew it would be tight, but the Eezi awn K9 under rack table slide and obvious table does fit under the slimline 2 rack on 100series. I did need to hash together a way to mount the lockable clasp, but so far so good. I think I will slide in a couple of...

As per title, looking to update the on board tape deck. Has anyone dropped in either a single din or double din unit with a 9"+ halo/floating screen. Particularly fouling controls or dash shape. Not after a tesla style dash remodel. Something like this.

Anyone on here? It's clean.

Anyone fancy trying this?

Perhaps just having a "blonde" moment today and hoping for some sanity. The bonnet on my Hundy lifts (and bounces) on the nearside probably 10mm when being driven. Latch is secure. Its going to cause wear somewhere. I can't work out how to tighten or reduce the wobble. Any ideas?

Seeking advice from the collective, 4 night stop, family friendly recommendations facilities required. End of August. Walking to the pub a bonus. Thanks.

I have an oily leak from the rocker cover (I think) and my car has just hit 150k, so planning some reasonable maintenance at the end of the the summer. Tbelt and WP was done <10k miles ago Just done oil/filter + Air. Diff fluids, transmission done Plus loads of other stuff. Currently planning...

As I know most of you like photos I'd thought I'd share a few from this years show. More to follow

A few people were keen for more information on my dry quick connects for my water system. These are the units I am using with the relevant barbed attachment for my hose size. I have 2 panel mount male and one female coupler/s Bought from these guys...

Popped up north for a friend's wedding and mini break, tonight's spot. Who else has escaped?

Can anyone UK forum based knock up a pair of custom sized molle panels for the inside of my gullwings please. I've found some pelle ones that would fit the space but would require some sections/ borders cutting out and were made of plastic. Thanks

Just for fun, as everytime I walk past mine it reminds me that I am not where I'd like to be, not that I know where that is. Itching to get away, get back to nature for some "green" therapy.

Not sure weather you all follow these guys, they were my inspiration for becoming poor, sorry, getting in to self sufficient vehicle based travel. Their new series landed on YouTube last Saturday for the UK and the 2nd episode was this morning. Their current trip is one of my ideal adventures...

I promised to do a bit of a write up from the trip round the emerald Isle @Andy and I took back in June 22. Life caught up and never got round to it. As there seems to be some interest I thought I'd get round to getting the basics down and then expanding on the trip. I spent 9months or so...

Stage 2 of project keep the wife/kiddies happy. Finally getting round to mounting my hot water system after having it in a wolf box for the last 9 months. Sounds glamping but honnestly a hot shower looking out over the beach to the sea is a proper morale booster. Takes 2 stage filtered water and...

Been building comfort into the truck so the family will be happier and I can venture out in poorer conditions. First stop was a diesel heater, thanks @Jacob100. Just waiting on the final exhaust section to be delivered so I can fit it and wrap it to finish it off. I may add an exhaust fan...

For the last few weeks I've noticed what I would describe as excessive condensation on the windscreen, which this am was frozen. Carpets are dry Windscreen has recently (last 18m) been removed and rust cut out and repaired. Drains for sunroof clear Don't notice it on anyother windows or...

Filled it up and promptly washed the drive this morning. As title says.

With my job I now need to travel once a quarter to the US and to various locations. I get a 2 bag hold limit but only going for 2 or 3 days I tend to only need 1, so thinking I can pick up some bits that are difficult or expensive here, obviously they need to fit in a suitcase so I can't bring...

As per other forum meets, add your name to the list. 1) HMG (Chris)

Love it that my children are at the age where they want to take the "bumpy wet roads" to the shops. The wife suggested Christmas shopping today, the children wanted to go in the truck... win win. Almost bit a bit too much off today though, new lane, deep tracks, mud and ice + minimal recovery...

Had a design flaw with my last custom boot build. I forgot to take into account failures and servicing. In short, I mounted my compressor in the rear offside quarter panel in the void where I removed the vhs player from. Plenty of air flow around it. I then built up around it. I was fine for a...

Back from my tour of Ireland (report to follow) and in typical chating around the camp fire style, discussing where the next trips will be taken, I floated the idea of organising a trip to the show in June 2023. I've never been, but understand its a good crack, weather dependent. Obviously it's...

Are the props the same in the diesel and petrol models I.e. a rear from the petrol will fit the rear for a diesel? and any difference for the pre '02? Then any suggestions on sources for new?

Slightly biased as a Leicester man but a good Premiership rugby final. Winners are grinners....

Tracking this vibration down and my transfer box is apparently a little noisy. Any recommendations on someone to rebuild it, midlands based ideally or is there a kit available. Slightly pushed for time if I need to do it.

After a sounding board. Truck developed a vibration around the time I fitted front bumper and winch. Can't see anything wrong or loose here. I also had the transmission fluid changed as I had a leak on the pan. Vibration comes on about 50mph at 1800rpm then disappears about 60mph circa...

Ordered the forum web address as a vehicle sticker. There was a minimum order value so will have some spares. Only looking to recover costs. They are due to arrive Monday next week, think i will have 18 spare. Need to work out postage and if they can be folded before finalising price, but less...

Been planning the connection of my new spots. Has anyone wired them just to the high beam trigger and wished they had an override to allow them to come on separately? Is it a legal requirement to have a second switch to activate them? Also looking for a feed for the DRLs any suggestions? I have...

Hi. Can I just confirm that this is the inlet heater feed and disconnection point. The wires feed back to a point mounted on the drivers side inner wing. How have others disconnected it?

Came across this on Facebook. Maybe of interest to some or another excuse to get tiddly in a field.

Did a search and found items relating to 80s but not the 100. For a winch connection on a right hand drive vehicle, drivers or passenger side battery? I believe physically the drivers side is nearest the alternator and the start is still 12v just utilises the amps from both batteries, so was...

So I did a thing, and bought an Ironman front bumper (BBCD006) for my 100 and am now looking at winches. I have the following on my short list but open to other suggestions. Prefer synthetic. Warn VR evo 10s Superwinch Exp 10SR Terrafirma 12000 Smittybilt x2o 10k synthetic. Cheers

As you know I am in the process of redoing my storage and kitchen and as part of this I wanted to add some gullwings to make the space more usable. I debated on which brand to go with and I saw a recommendation for wings from The Crusier Company, TCC for ease. Home | The Cruiser Company -...

Maybe i have misinterpreted what I have read but does this... At a junction, drivers, motorcyclists, horse riders and cyclists should give way to pedestrians crossing or waiting to cross a road into which or from which you are turning. You should give way to pedestrians waiting to cross a zebra...

Finally got Thomas back from the body shop with a much lighter wallet. I had them remove the windscreen and address the rusted areas. Also to do the same to the rear lower arches. The screen side trims had been held in with screws instead of the captive rivets and i also assume there was some...

Selling my smaller water tank and sender now I've increased my capacity. Dims. 695x165x355 lxdxh h includes cap 30l black, vented cap. 1/2 bsp brass lower connection. Additional 15mm hose connection on top, previously used as a fill line. 240-39 ohm float sensor included. Collection or I...

Anyone fitted a level sensor to the FR slanted tank. The access point is too small to get a hand in for an internal nut/s so only option I can see is one mounted to the the tank cap or using screws from the outside. I have an analogue gauge which I'd like to keep so I've been looking at float...

Nice to get out and see more of you this year, hopefully 22 is even better and we can start to travel further afield. As iam hosting 12 this year, I think I'd rather be round a roaring bushpig with @fbnss Wings, G&T in hand and my Bundutec to hide I away in at the end of a night's chin wagging...

Rant time: If you have f*cking sold something or its no longer for sale remove the listing If you posted something for sale, f*cking respond to messages If I turn up as arranged to pick something up, f*cking be in or have the common curiosity to tell me otherwise. Rant over..... I feel so...

As I had to remove all my drawers and boot build for some work to be done and to allow reconfiguration because of the gullwings which are on their way, I am looking at buying a new stove to build into the new layout. Don't have enough battery space or money to go induction so will stay with gas...

Well the time has come and funds allow to get some rust attended to in the boot spac/arches. Unfortunately this meant removing all of my custom galley, electrics and plumbing. The positive means that it's an ideal time to install my gullwings. I've just ordered these from Australia via The...

So I finally got so fed up with every other post being an advert for some pile of junk or legal scam and, getting banned for a week for telling someone to "crack on with their day", that I have set in motion the 30days (why so long) deletion process. Iam now looking at alternatives, so set up a...

Just came across this.... Lunacy. Not a weekend job. http://www.4x4prostaff.com/flow_gallery/gallery-1014-17556.html

Rolled into the reception to get our pass for a local field to find this. Each to their own but, hell no....

Unless I am blind I couldn't see a tread for this. Any interest. Organisers are saying camping tickets are nearly sold out?

Huge long shot but looking to buy or rent some ostrich wing side panels for a trip to Scotland, hopefully to keep the midge numbers down for the wife and little ones. Going last week in July. Preferably 2.1m I thought TT had them in stock but they were the 2.4s

Well, thanks to Tuff-trek my new RTT, Bundutec King arrived in time and has been installed, hardwired and prepared. I hoped to test it out at the overland show but turns out that work and the wife have other plans. Any how thought you'd all like some pictures.

Well I've had some time and some spare cash that's to working from home so managed to get phase 2 off and running. Fabryka rear bumper with dual swing outs, huracan tail gate storage mod and slowly removing aspects of my now redundant AHC system. Re-wired my rack and changed my lighting...