Search results

Hi everyone, I have a landcruiser Colorado 90lwb. The rear chassis is rotten and would need ALOT of welding, from rear passenger doors back. Rough and ready she was used as my daily but used off road a lot, every week/weekend, the engine starts and runs an drives, transfer case was rebuilt with...

Hey everyone, I’ve just noticed that my drivers side rear wheel is flush with my arches but my passenger side is around an inch or so INSIDE the wheel arch on the rear of my Colorado!:oops: I’m panicking now that my chassis is twisted or axle is about to fall off hahah. I’ve just had the front...

Anyone had to replace fuel lines due to pin holes? Mines rusted around the rear passenger door, can I cut the bad bit out and jubilee clip some rubber hose on to the metal fuel line? Will it stay on or could the pressure blow it off? Or go a garage an see if they can make a metal one? thanks

Anyone selling one?

Hi, another problem with my Colorado:cry: was driving along today and the car felt different, sounded like a belts loose or something just went to do a lift then and had a big clunk/crunch while going along, pulled over an nothing looks loose but it’s dark. had to limp it home due too being...

Hi everyone, I’ve lost 1 nut from the front prop to transfer case and 2 rear prop too transfer case nuts while I rebuilt my transfer case, I thought I could throw any old but on but nope... thread is wrong haha does anyone know the size and thread pitch or know where I could buy some from...

Has anyone tried a set of standard 120 series front springs on there 90? ive read a lot of people in aus use the lifted 120 springs for 3”~ lift but was thinking a standard height 120 may give an inch or maybe 2? trying to lift mine on a very tight budget due too buying the wrong front...

As above, after a set of standard used front springs off a 120 series north west ideally!

Anyone on here make or sell steering spacers to fit a Colorado? got a 2” bodylift but didn’t come with the spacer :grin: :disappointed:

Hi everyone my transfer box/case started clunking a while back, sounded awful under acceleration, would make a fast clunk clunk clunk when ever I accelerated, only way I can really describe it is like a ratchet clicking/spinning haha. Removed front prop an noise went, bought a daily car and my...

Hi does anyone have or know of a Colorado transfer case for sale or anyone breaking one?

Hi everyone, I came off a muddy track today and heard a bang which I thought was a stone hitting my arch. Drove into Tesco and pulling into a space heard a loud bang and people looked over so must’ve been loud outside haha. Then on my way home, setting off from some traffic light it done it...

Hi everyone, my front driverside lowerball joint and wheel bearing went and noticed i had a leak from the diff seal, ive also had slight leaks on the transfer case and near side rear axle seals which have gotten quite bad Im going to try fit them myself, front and rear axles i can strip without...

Anyone selling a 2" lift for a lwb colorado 95? Or evn just lifted front shocks and springs?

Hi ive got a set of modular steels for my lwb 90 amd the tyre fitter who was going to fit my mud terrains said that i will need diffent wheel nuts to fit them on? Is this true? New to me if so haha Thanks!

Hi everyone I had my rear pinion sealchanged last summer by west coast due to it leaking badly. Ive noticed there is weeping on the flange/ diff to prop? No drips but you can see its damp through the dirt. Is that normal or is it something to worry about amd get another seal? Hoping theres...

Hi everyone, my bumper lights f***ed up for the last time yesterday so ended up making the fake lights light up. Ive just connected the bottom bumper wires to my bodge job and used some push fit 501 bulb holders for my indicators.. So now my indicators flash as if i have a bulb out but...

Anyone got a full set for sale? New sets are around 1000 that ive found haha can buy a landrover for that with a lift haha

Hi everyone, another problem! May aswell have bought a landrover Went to pick up some steelies today and after a problem free journey 40 mile each way i got a mile from home and heard a weird metal crunch, its not constant but it does it once im going along randomly, ive only drove it home...

Hi everyone ive just got a 52" light bar for the roof of my colorado and the mounts it came with are completely off. I want to fit it asap so thinking of making some mounts out of a steel sheet? Has anyone else done it and if so any pics and how youve done it? Ideally i want to mount tgem on...

Anyone know what i need to order to fix this? Just smelt it ane noticed it

Hi everyone, just came back from a 400 mile round trip, got home and checked under the car as i could smell gearbox oil very faintly near home. Noticed its coming from this rubber pipe clamped to a metal pipe around the clutch/front diff area (couldnt look properly as was pitch black and...

Was bought some spacers for my lwb colorado, upon fitting them i realised the front nuts only tighten around 4/5 threads. Looked up and it seems a common issue, rough trax wont sell me tge studs as the spacers were bought else where Does anyone else who has had this issue know where to buy...

Hi ive had a problem with my tail lights on my collie for a while, its coming up to mot time so decided to buy new ones.. I used to have very dim tail lights and with lights on only one side lit up but all brake lights worked. Lights turned off my top and the opposite side lit up as a brake...

Hi, my front near side body mount has rusted badly and needs replacing for the mot. Welder told me its unsaveable haha. Is there anywhere i can purchase a new one or anyone know anywhere in the north west of england who might have a good one off a breaker colorado? Thank you

Hi everyone, I had a 2nd hand rear diff fitted, as my previous one had worn bearings. The seal on the diff fitted leaked straight away but was fine on the car it came off, so after a bit of searching online i read about diff breathers blocking so ive bought a breather extender kit off milner...

Hi first post here, ive recently bought a colorado 3.0d and ive had to replace the rear diff, after removong the diff to fit the new one, the diff locks in both diffs have fell apart on removal. I need my car back on the road asap so the garage has said they can weld a plate over the hole for...