Search results

Hi Guys and Girls I have a JS80 3000amp jump starter will it put out that much ?? who knows but I saw it on one of those 4x4 online people they had an old hilux that the battery was dead and it had been sitting for some time not even a test light would glow, they put this unit on it, turned on...

on a 100 series the depo lights go straight in and the adjuster motors fit in perfectly no problems at all could not say for the 120 series but for the 100 series 2006 model Sahara they go straight in

sounds like the alternator to me time to replace it or over haul it,

Hi and welcome if it is a factory diff lock they are a permanent magnet motor and the magnets come loose in the motor case bugger of a job there is a thing on it in youtube but it is a diff center out job to fix or buy a new unit and fit it

finding one over there with out rust could be a big asking got a 89 62 series but it is down under sorry mate, plus it is a petrol model and no rust in the roof line at all

Hi Mike Gazza from down under mate on the right side of dash where the mirror control and head light adjusting switch is when removed there is a short piece of loom that connects the 2 looms to gether and has the plugs on it for the mirror's and headlight adjustment switch if you still have that...

how true that is

I do mine my self being a mech by trade and having my A/C accreditation got own gauges, vac pump etc, a lot of places have the fully automatic machines they hook them up and let it go then walk away to do something else, if you got a problem the gauges will tell you 9 times out of 10, if you...

Gauge Holder for Toyota Landcruiser 100 Series Pillar Pod 52mm 60mm 2" inch I know that it is in Australia but this guy dose a real nice pod and you dont have to change the piller cover and they fit real neat

it's a aussie mix and match works a treat and you end up with one hell of a 105 series to do anything with a mighty heart to go just about anywhere and it is basically a bolt in application using Toyota parts and a FTE engine

you would need to try and find one in the UK with no rust ?? like looking for hens teeth depending on the money you have it would be good to get one from somewhere that dose not have salt on roads so you would have a good start on the project once got it into the UK get it treated and it would...

great vid just shows that the 40 dose not need much compared to the modern units the old 40 is still king o_O

No he won't he is a deer shooter not a mountain goat haha

Hi Philip not to sure if they can be swapped out for one another have not taken much notice but I believe the converta on the V8 is bigger check the numbers on the plate on the side of trans A750 is the 5 speed V8 box I think that the tubo six box is the same change the bell housing, BUT if...

Very different chassis all round 100 to a 105 chassis better off trying to get a 105 or put diff locks front and rear as for the swap not been done that I know of as there is plenty of 105s in OZZ maybe look abroad and import one no salt on roads here no rust

Hi Guys my son has a 75 40 series and with a 2inch lift he put 35/12.50/15s on it so you would most certainly get 33s on with just a 2 inch lift but check the with as my son had to put flairs on the rear and cut the wheel arch out a touch bigger hence the 35s and 12.5 wide Gary from down under

thx for the info Guys to all that have helped me I am a mechanic by trade kind of old school have done all my courses on the modern motor car EFI petrol and diesel, elec auto's, ABS etc I am fully registered A grade VACC mechanic by trade. but at 68 years old am retired I still have my scanner...

Hi Gary thankyopu for the info is it running on win 7, 8 or 10 64 bit or 32 , I have a copy of 16.20.023 with a patch to get it going, I already have my USB to OBD patch lead and an old lap top that dose not gey used much these days for anything we have changed our modem so it dose not even...

Thx for that pugwash now just got to get a good version of Teckstream thx

Hi mate no probs got to go to my dads place for a few weeks to cleanup the property he passed away last year aged 92 he had a good inings now got to help me step mother with some of his things so will be away for a few weeks thankyou Gazza

Hi karl got one not used these days old unit with win 10 update on it think it was running win 7 then got up date to 10 but no it is not used for anything these days most likely will need new battery to get it going been sitting for about 18 months now

Hi karl2000 thankyou for the reply as I am looking to see what version people are running hopfully somthing thats easy to install on a laptop

hi mwhtc is it possible for you to send me the link for the down load V16 thankyou

Hi Guys what version of Techstream is people running using to find fault codes and other things tuning them on or off thankyou I have my connector to hook to my laptop just wondering what version people where using

Hi Reece if they are quoting on a full rebuild then that could be right, hi and low range shifter being stuck is common on these and 80's if they are not used or moved on a regular basis, the shifter seizes on the pivot shaft and it is a prick of a thing to get to have had a few customers with...

Hi Guys any body running a scangauge on there 100 series if so can it read Trans temp and coolant temp I have a 07/2004 Sahara with the 5 speed auto and the 4.7 V8 petrol thankyou Gary

cool thankyou very much been chasing this for a little while tried a few links now I have it cheers from down under

Hi Guys and Girls dose anybody have the wiring diagrams for the head lights / headlight tilt motors or the complete wiring diagrams for the 100 series mid 2004 on thankyou

Hi Robert sounds like you got a pretty nice rig as well gotta love the 100 series cruisers

Hi Iwan thankyou for the help I also sent a Email to Karl Webster on his Landcruiser site but have heard nothing back yet from him he may be looking for me but will most certainly have a look on ih8mud forums and have a look around once again many thx for the help and advice

Hi Iwan thanks for the reply as I am in converting my cruiser to the last cosmedic up grades mid 2005 to mid 2007 thought I would also put in the adjustable headlights as well most of the wiring is there except for that small piece of loom behind the dash, my electric mirrors are fine the wiring...

copy of parts listing for the piece of loom that I'm after no longer available from Toyota

Hi Bob thankyou for that as it was a opsion in Ausse on Sahara models only or seems to be in great supply on the Lexus LX470 in Ausse but very hard to find at the wreckers here but I believe it is more common on Landcruisers in the UK

anybody want to drop the name or web address of any wreckers in the UK that specialise in wrecking 100 series landcruisers thankyou I might be able to chase up what I need

Hi Guys not to sure if anybody can help me but chasing a piece of dash loom from a 100 series Landcruiser or a Lexus LX470 2002/2007 that goes behind the dash where the electric door mirrors, headlight height control switch is and I think on some models there is also 2 switches for the very rear...

Hi Jibberjabber mate when you got the guards to make room for the blinker to fit was it the top or bottom of the opening around the blinker thx Gazza

Hi Jibberjabber stage one will begin soon got my headlights to day hope fully tail lights in a couple of weeks then some more bits and pieces, Jabber apart from the switch and motors that go on the headlights for leveling of the lights is there a relay control box some where as well thankyou Gazza

Hi Guys not to sure what we up to as the ball & chain records it for me to watch much later in the evening after she has gone to bed

Hi jibberjabber thankyou so much this gives me a lot of help now just got to get some parts thanks and yes outback truckers is a great show to watch

Hi jibberjabber no mine dose not have leveling headlights not in ozze that I know off I could only wish. was looking into the after market units they use H7 globes in both hi and low beams I am going to see my local Toyota dealer spare parts guy he is getting to know me well now like you I have...

Hi jibberjabber thanks for the reply have looked at the after market lights and the ones that are available in ozze are the units that are blacked out around the reflectors to me not look so good , Have also looked at the 05 to 07 headlights and they perform much better and give a neater...

hi guys jinnerjabber was there much work in upgrading the front treatment headlights etc as I have 2004 Sahara Australian model and have been thinking of trying to up grade the front of it

Hi Guys has anybody had anything to do with the 5.7 V8 3UR-FE trying to find out if they will bolt in to a 2004 UZJ100 4.7 2UZ-FE is the bolt up the same will my 5 speed auto bolt up or is there shit loads of work required to fit sump etc a few more cubes for towing would be great as my old 62...