Search results

I have a mate who has a winch mount same design has I made, wants £180 ono for it

I have my set of 90 series alloys with 265 75 16 Cooper STT's now up for sale The tyres are in good condition but have been used, 2 have 11mm on them and 2 have 13mm, wheels are in used condition from a 1997 Collie Looking for £425 for the 4 before they go on the bay where I will split them

Day 1. oohhh errrr Matt looking for a bit of Steve 5.7 Hemi Day 2.

Well the cruiser days are done for me, been good but have to say have never quite got hold of me like my previous brand (Jeep) I have a new VW Amarok Dual Cab Pick up on order for laning and caravan pulling and have got mslef a pay and play toy for things a little more severe, also just in the...

Front Caliper Seal Kit (Genuine part), part number 04479-35040 £30 Rear Caliper Seal Kit (Genuine part), part number 04479-60030 £ 20 Rear Transfer Case Seal (Genuine part), Part number 90311-41007 £10 3.4 V6 Petrol Starter motor, bought as spare unit £50 Pair of front shockers...

a couple of spares I had, complete and in good order £50 for the pair

I have a couple of spare front hub assemblies I managed to get hold of as spares, also with ABS sensors Bearings feel good, back plates are a bit bent but would go again £40 each or £70 for the pair

I have a pair of rear half shafts that I kept for spares ready for when I broke one but have never managed to do it the back plates are a bit bent but would straighten £30 each or £50 for the pair

bought as a spare, I have wire brushed it to death and it has a slight bit of surface corrosion but casing is solid as a rock, does have a sheared bolt in it, I think it is for the cover but should come out easy enough, will ahve ago at the wekend ermmm how much are these worth used ?

forgot I had these in the loft, bought as spares as you will see they ain't done a lot £50 for the pair

this is the size of the hose on the 3.4 V6 but not sure about the oil burner, good mod if you are looking at electric fan conversion Brand New never been fitted £25 http://www.x-eng.co.uk/StoreDisplay.asp?SL=75

I have a 95 Body Lift bought but never got round to it (still in bag) and it looks like the Cruiser will be going soon so I am starting to clear out my bits and bobs...

done mine today using all Milner's parts, I am starting to question the quality of the parts with the amount I have lately, I know they do plenty of cheap genuine parts but the non genuine stuff does appear to be questionable to say the least The shoes appear to have too much meat on them The...

not a Landcruiser obviously but one of those tin tent things

Has anyone split a front diff, I am pretty sure I have broke a tooth but the set up looks like most other things Toyota 'strange'. I cant work out if I can split to have a look or if stripping it is actually a full strip down and interferes with the diff set up / pre loads etc... any advice is...

blooming thing, first lane I hit so I am guessing I cracked it with the last battering I gave it in Nottinghamshire Have I heard people having problems with Milner's ones ? Need to do the whole front end now so gonna do all ball joints, CV's both sides, driveshaft seals and steering rack boots...

as it says really, decided I am gonna get twin fans instead, I had it originally to fit into my Jeep but never got round to it. with the fitting kit it cost me over £180 £120 if anyone wants it on here before it goes on the bay this is the fitting size...

the bearing as con on my air con pump and i am hoping i can do it in situ, has anyone had one to pieces. Have dropped the belts off and got the outer part of the pulley off (outer magnet) does anyone know if the pulle is either pressed on or held with a snap ring ? i ran out of time to go any...

has anyone used them and any issues if you have thanks in advance http://www.discount-cooling.co.uk/Radiators_D9859.html

Well North Nottinghamshire aint the most challenging of places and after a steady start things took a dramatic change all because of one lane, the sort of lane that if you could you would turn round but you cant

I have started to fit my dual batteries under the bonnet As most that have seen under the bonnet of a 3.4 V6 there ain't much room, adding a full sequential lpg system doesn't help much either I don't have any recent photos of the under bonnet, basically the one below is from when I first had...

WHEELS ONLY I have the wheels I had on my Cruiser for sale they are Diamond Cliff wheels and the size is 16x8J with a PCD of 6x139, 20mm offset, they come with a full set of wheel nuts and some hub spacers that were for fitment to a new Hi Lux one of the wheels does have a couple of good...

well what can I say apart from I am absolutely knackered Day started really well with everyone there in good time and most had a maccy whatever for breakfast and a quick fuel up Cracking day and thanks to those that made the day, big and I mean big thanks to Munster and his winch Well as said...

slideshow here with many more pics http://s754.photobucket.com/albums/xx186/J66P/Peaks%2020th%20January%202013/?albumview=slideshow this proved trickier than it looks this nearly went wrong the bull look at the ice pretty deep posing shot...not...

to my wheels and tyres to see if I get on with some BFG At's, what do you think then

has anyone got a picture of a 90 / 95 series with some standard 80 series alloys fitted that they would like to share please ?

would there be interest in some under body skids for the 90 / 95 series would be of a similiar design to the ASFIR ones but hopefully a fair bit cheaper, if i can get an idea of numbers I will be able to get an indicative price. Would need to know if you wanted a front skid centre skid 90...

Nipped up to North Yorkshire with a guy (Ian) from work, cracking days weather and we managed to get quite a few lanes done The real challenge was the lane that leads up to the ford at Belford, the water errosion is pretty deep, I just amanged to get through but unfortunately Ian couldnt make...

anyone got any experience, they look pretty decent and price is pretty decent http://www.carseatcovers.co.uk/toyota-c ... -front-452

I have my camping trailer surplus to requirements so like everything else it may aswell go tis a great little trailer and has done absolutely nothing to be honest, as far as I know it's done about 1000miles its a 500kgs trailer with a payload of about 350kgs, not massive but certainly big...

http://www.ebay.co.uk/itm/180928838866? ... 1586.l2649

They have finally got their way, the beginning of the end for the Peak District I am afraid Official release ! Just received from PDNPA. Please see below some news from Derbyshire County Council Rights of Way department which they have asked us to pass on to you all. The formal notices of...

does anyone know what a 90 Series with 235 85 16 tyres fitted looks like, do they look too skinny ? anyone have any pics by any chance

right I have finally decided I am going to fit my Kenlowe fan and take the Viscous fan off. I have acquired a X Eng fan switch set up ( http://www.x-eng.co.uk/X-Fan%2034mm.asp )and the instructions say fit in the bottom hose ( http://www.x-eng.co.uk/Instructions/X-Fan.pdf ) , firstly I know...

As some may know i am a member on a few sites and actualy also run a Jeep specific club We are running an event that will be a little different and special and thought given the time I spend on here we would open up 5 available slots (at this time, maybe more maybe less dependant on sign ups)...

changed my rear pads and discs, I just wanted to get my monies worth butnthink I went a bit further than intended

which Colorado these came from ? 16x7's they are sat on 265 70 16 tyres

anyone changed one and got any tips :mrgreen:

does anyone know where the rpm signal comes from on a VZJ95, I am thinking it will be the alternaot but not sure which wire. Anyone got any ideas ?? thanks in advance

Been on a camping weekend in the Peaks this weekend with the club I run, been an absolute cracker and the weather even stayed with us. Got the say I was the odd one out given the brand :whistle: :whistle:

there dont look many options so possibly looking at a custom stainless one but thinking it aint gonna be cheap. Could very well get it tucked up out the way a bit more though and drop it as a side exit rather than rear :idea: found these tp://www.onlineautomotive.co.uk has anyone used them ...

Been on charity fund raising event today in Scopwick Good day, reasonable size site with all the bits on the outsides, defo not too risky even in the worst places but ok for my sort of liking Paintwork looks a bit sad and I have for the first time done a bit of damage to my truck, bent the...

I havent been out since my trip to Wales and have been doing few jobs on the Cruiser sio its been off the road for around 6 to 8 weeks, finally got it finished this morning so went for a quick test run in the Peaks with Bookend Been a good bit of work to stop the idiots in Pindale...

I am after a couple of heated seat elements for my Colorad, anyone got any ideas cant see anything even in the parts catalogue ?? Other alternative is I am gonna after fit some Waeco ones :roll:

given I had already used 1/8 of a tank

Please take a look here, its pretty self explanatory in helping to try and combat and show our feeling towards the ramblers that are assemling to try and shut some of our great lanes in the Peaks I hope its in the right place, admins please feel free to move to right location if incorrect...

and loom fitted the lights into the rear quarters but now need the loom and bulb holders if anyone out there as them

at the tender age of 54, a true legend in the golfing world http://news.bbc.co.uk/sport1/hi/golf/13311206.stm

I am after picking up an ignition feed to power up a few components that i want on ignition rather than permenant. looking at the wiring under the dash there isnt any clear point to take the feed from other than the switch, does anyone have any suggestions :pray:

for 90 Series Rocksliders like the ones I have done for the 95's ??