Search results

The wee plastic cubby hole that’s sometimes missing or has the blanking plate instead. I was going to use this on my own 80 and free up the “Toyota” stamped cover, however I plan on going double din in the future so it’s pointless fitting it now. To my knowledge this will fit both pre and...

Removed from my breaker. A very nicely made thick plastic (6-8mm) boot tray. Can’t find a brand on it. Might have been a custom order from somewhere.. Fits very snug. You need to slide it in at an angle, if you have rear seats they will need to be removed. One join has a slight separation...

As title, to fit the earlier style 80 series. Good condition, no rips. Very minor lines in the leather. £120 including delivered within the uk.

As title, this kit has been involved in a front end accident. It requires a new intercooler and a lower 135 degree aluminium pipe. I will include the damaged pipe for your own reference. Cooler dimensions 620mmx320mmx70mm. Two silicone 90 degree hoses are folded but not damaged. New kits...

As title, early style switch. Backing light works. £50 posted to the UK.

Has had a nasty front end, chassis is bent and body isn’t much better. Usual vx limited jdm spec goodies, folding mirrors, centre console fridge, overhead altimeter/ compass etc. Tailgate, front wings and inner wings all buggered. Alisport FMIC kit needs a new intercooler and possible lower...

Set of 8 seats out of a 1994 jdm 80 series. All need a good clean, drivers lower bolster has worn through. Would like to sell as a complete set but may sell individually. £150 collection from Aberdeenshire.

I removed my left front wing the other day to fit the new antenna mast and in doing so realised just how bad it was. Found out autodoc list “klokkerholm” wings, but they are out of stock. Couldn’t find them anywhere else other than a company in Ireland. So I emailed klokkerholm and the reply...

I’ve been meaning to do this for a few months now. But I finally found a few hours today (3 infact, minus lunch). Highly recommend if you start playing with fueling or boost. Step one is spend lots of money on a 3” stainless dump pipe and down pipe. You could fit one to a standard dump pipe...

I’m toying with the idea of changing the wheels on my 80 series. The most annoying thing is I can’t for the life of me find a correct centre cap I’m missing for the original wheels. They are held on with plastic tags/ lugs as opposed to the metal clips on the rest of them. So before I pay...

I bought this off eBay a few months ago without doing any research and turns out it’s the wrong style for my wheels. I think it’s for earlier wheels, it doesn’t have the Toyota sticker in the middle, it seems it’s slightly smaller and won’t clip onto the wheel. My wheels have “JRD” cast into...

This setup came on my 1994 4.5 jdm breaker. It consists of front bumper raiser brackets which push the bumper forwards about 2”, and also a plastic filler piece that is bolted to the front valance. It’s not after market as the plastic bits have Toyota part numbers and the valance has factory...

Ive had a 1995 24v 4.2 manual gs in moonglow pearl for the last 5-6 years. At around the start of the year I also picked up a 94 4.5 jdm petrol as a donor (vx limited spec). Started stripping a few bits off the donor, and around the same time the mot expired on the gs. A couple weeks later...

These wings came off my donor truck, didn’t realise how bad they were untill I removed the plastic arch trim….still better than the ones on mine. I’ve been a panel beater for 11 years now starting when I was 16, finally tooled up at home now enough to take on repairs. Thought I’d show some...

So I would like to know the interchangeability of axles and differentials. I have a 94 4.5 petrol auto ABS non diff lock breaker. Are the axle casings the same across the range? I’d like to build then replace the axles on my 97 4.2 Amazon ABS with lockers with the ones off the breaker as...

Quick question, are there any differences between an automatic chassis and a manual one? I seem to remember (when looking at drop boxes) that there was manual and automatic specific ones, some cross member in the way? I have a 94 jdm petrol breaker and always wanted to do a body off resto to...

Nice jdm fridge in the breaker, I’m having that he says. Bit grubby and the front piece had faded. Luckily the aircon pipe bolts came out without snapping (same can’t be said for the rear aircon unit, that’s another thread) Tested to see if it works, obviously no gas left in the system...

Considering moving away from black modular wheels and going for a set of split rims that came up local-ish on fb marketplace. Any pictures of 80’s with similar wheels?

From what I’ve found these are quite a rare item/ option and only found on jdm LC’s. So me making a thread about repairing them is like a how to guide on picking up rocking horse sh!t. But if it helps one google searcher in 13 years time then thats good. They came on a breaker I recently...

4x wind deflectors 1x sunroof deflector No cracks. Comes with fixings. £200 collected from Aberdeenshire. Can post for extra.

Full length roof rack for sale. Mild steel. Mesh floor. £350 collected from Aberdeenshire. Can come with a tailgate mounted ladder for extra.

Hi, recently picked up a breaker for myself. It’s a 94 Vx limited 4.5 auto import. A few of the toys I’ve noticed it has and would like to fit to my 95 24v manual are: Auto headlights Front fog lights (in headlights) Power folding mirrors 3rd row aircon setup Centre console fridge Roof...

https://www.copart.co.uk/lot/59065041/clean-title-1985-toyota-land-cruis-sandtoft

https://www.gumtree.com/p/cars-vans-motorbikes/toyota-land-cruiser/1414405588?utm_campaign=socialbuttons&utm_campaign=socialbuttons&utm_content=app_ios&utm_medium=social&utm_source=ios_social Or someone’s getting a very cheap manual 24v and I wish I never shared this link.

1993 Toyota Land Cruiser Series 80 VX For Sale By Auction | Car And Classic - [Leaving Land Cruiser Club] I bet this will make atleast 30k at auction…

1991 Toyota Land Cruiser Vx 4.2 turbo 80 series | eBay - [Leaving Land Cruiser Club] Got all excited for a second… Reg check shows it’s mot and taxed, some poor buggers truck being used as bait.

As title, only seem to find them in Australia. Heard the correction bushes aren’t as good.

This came up on my (almost hourly) check of local stuff on eBay: https://www.ebay.co.uk/itm/Toyota-Land-Cruiser-80-Series-4-2TD-VX-5-Speed-Manual-/293870609349?_trksid=p2349624.m46890.l49292 It’s had extensive welding to the rear a few years ago (I remember it behind parked at a local garage...

Ive been prepping the 80 for its mot over the last few weeks, and came to look at the rear diff lock. I had done it up a few years back, worked, then stopped working, didn't really look at it then. Now it looks like a swollen mushroom. Actually broke in half when taking it off, screws had...

One of mine needs a new piston (possibly scratched bore too) and the other isn't great either. For the price of a rebuild kit and a few hours of my time I'm weighing up the option of these...

So my 95 24v manual is acting up. Started quite a while ago but ive used it on and off for the last 6 months. First started when I turned the ignition on, the glow plug light would come on for a fraction of a second, rather than the usual 0.5-1 second. As that would happen, the doors would...

I have a few sets of runners from a rotten tool box I just took to the dump, thought someone might make use of the runners, good quality ball bearing ones. They extent out quite a lot, can get pictures and measurements if theres interest. At a guess 2ft long.

Had my first recovery last night on the way home, old lady in a fiesta couldn't get up or out of a dip/hill! Needed a light to see where I was hooking onto her side, trusty iPhone light was used but I want something more substantial. Been looking at various 10_20watt lights on eBay. Must be...

https://m.ebay.co.uk/itm/TOYOTA-LANDCRUISER-4-2-TURBO-DIESEL-24-VALVE-MANUAL-BLACK-80-SERIES-UK-CAR-S-REG-/162723420819?hash=item25e3125a93%3Ag%3ANf8AAOSwFyhZ7kZ0&_trkparms=pageci%253A83c630da-b8b3-11e7-8aa0-74dbd180e03b%257Cparentrq%253A4e453a9715f0a9cb2d185a8cfffe37f1%257Ciid%253A2 Looks...

Went to look at / sort out the handbrake today and noticed the extruding part of the backing plate that has the return springs on has gave way with rust (right hand side). Milner only have backing plates for the drum brake model...

http://www.carandclassic.co.uk/car/C775741 Star ship millage, but looks quite clean, diff lock and manual, for 2.5k? Whats not to like.

http://www.ebay.co.uk/itm/Anthracite-Car-Mats-Toyota-Land-Cruiser-VX80-1990-98-Boot-Mat-Fixing-Holes-/222200945008?epid=2059888078&hash=item33bc355970:g:kR8AAOSwENxXmMwq Came across these, has anyone got a set? Fit and finish of these sort of things can be a bit wonky sometimes.

Would have loved to do some overlanding with this and the 80 but a house has came up so I'm selling some assets, every penny is a prisoner. Build thread : https://www.landcruiserclub.net/community/threads/bought-a-trailer-tent.147941/ Gumtree add ...

Been looking for one of these for a while. Ever since a trip to Skye last year I've fancied something abit less pikey than a caravan but more sturdy than a £20 tent. Haven't put it up yet but layed everything out and all seems well. Might chance the lino flooring and paint it gray to match the...

So my truck came with a (poorly) fitted "zani" sunroof. Its missing the motors to move it, the button panel, the surround trim is loose and hanging, and it leaks abit when I wash the roof. I'm in two minds to just seal in the glass part so it doesn't leak, remove the surround and get a second...

So today I removed the drivers side battery and tray so I could get better access to the nut to tighten the steering box. While I was spannering about, I accidently bridged the positive terminal to the body, and it made a small spark, nothing major. Then refitted everything and connected the...

The time has come to sell on my land cruiser, only because I've bought a manual 24 valve version. 4.2 turbo diesel 12 valve, had the big end bearings replaced with ACL ones and new genuine stretch bolts a few years ago. Automatic gearbox changes smoothly, some people have even compared it to a...

1995 (GLX?) 24valve manual, 185K miles, pretty clean, chuffed! I just felt my auto was abit restrictive when off road as I couldn't really get into 2nd-3rd gear low box for those tough times. Already came with a 2" iron man lift, 35x12.5x16 maxxis creepy crawler tyres, iron man snorkel and a...

http://www.ebay.co.uk/itm/TOYOTA-LANDCRUISER-/172261522921?hash=item281b963de9:g:g2AAAOSwOVpXeCfp Exactly what I'm looking for just now, but is this a realistic price I'm looking at? Seen expedition prepped ones in the past for about that.

.

1994 with abs, think its ever since I did the rear brakes, when ever I press the brakes quite firmly now the trucks dives to the left, but dips to the right more so? Ive changed the front dampers, the left one was like a coiled spring when I removed it and the right side was soggy as anything...

I have 5 wheels and tyres that came off my landcruiser due to an upgrade. 4 centre caps 5 kumho road venture mt 285 75 16 with good tread Located in Aberdeen £350 need them gone

So just before Christmas I got t-boned by a drunk driver who made off afterwards (police got him at is house:lol:) Truck stood up very well, was only doing about 20 at the time: Managed to track down his car the day after, what a mess: Air bags deployed, seat belt tensioners gone...

Mot tomorrow and my rear fog lights aren't working. They were a few months back, since then only thing I've messed with there is replacing the tow bar loom. Anyway, while I'm in the bottom left rear corner where the plugs are there's this plug that's not being used, blue with 6 wires in it...

With the mot fast approaching, I had to do something with my non existent handbrake. I replaced the cable a few weeks ago to no avail, then read somewhere you could weld 5mm to the dogbone in the mechanism to space the shoes out more. Did just that, abit of fettling with the cable, return...