Don't like the adverts?  Click here to remove them

54 mm socket

G

Guest

Guest
good evening,
Re; 54mm socket, i assume it's for the wheel bearing's on a lc 80 if so i recently purchased one from a builders merchant's in wrexham, cost approx =A320 it took only a day to get it, any body needs the address it's
F.W.B
FIVE CROSSES INDUSTRIAL EST.
COEDPOETH,
WREXHAM.
LL11 3RD
PHONE 01978 720720
FAX 01978720721
Hope this might of some use you.
Dave,aa
 
Hi Dave,
Thanks Dave - did they supply a proper thin walled 1/2" or 3/4" drive
deep socket. A lot of companies sell 54mm box spanners, or 54/55mm
normal sized sockets, but they either can't be used to torque the nuts
up properly (i.e. box spanner) or they won't fit into the hubs of the
later model hubs (like the Draper sockets).
Do you have any make/model/part number info?
--
Regards,
Julian Voelcker
Mobile: 07971 540362
Cirencester, United Kingdom
1994 HDJ80, 2.5" OME Lift
 
Hi Dave,
Thanks Dave - did they supply a proper thin walled 1/2" or 3/4" drive
deep socket. A lot of companies sell 54mm box spanners, or 54/55mm
normal sized sockets, but they either can't be used to torque the nuts
up properly (i.e. box spanner) or they won't fit into the hubs of the
later model hubs (like the Draper sockets).
Do you have any make/model/part number info?
--
Regards,
Julian Voelcker
Mobile: 07971 540362
Cirencester, United Kingdom
1994 HDJ80, 2.5" OME Lift
 
On 11/14/05, DAVE ROBERTS <[Email address removed]> wrote:
Hello Dave,
I've spoken to these guys and was toild they only have a 50mm/55mm box
spanner but it costs almost 80 quid.
Can you give me more details about the spanner you bought?
--
Rgds,
Roman (London, UK)
'92 HDJ80
 
http://www.amazon.com/gp/product/B0...529?v=glance&n=228013&_encoding=UTF8&v=glance
http://www.dealclick.co.uk/product/207947/ELORA-54Mm-Bi-Hex-Socket-3-4Drive.php
http://www.thetoolwarehouse.net/shop/TTW406.html
----- Original Message -----
From: "Roman" <[Email address removed]>
To: <[Email address removed]>
Sent: Tuesday, November 22, 2005 1:30 PM
Subject: Re: [ELCO] 54 mm socket
On 11/14/05, DAVE ROBERTS <[Email address removed]> wrote:
Hello Dave,
I've spoken to these guys and was toild they only have a 50mm/55mm box
spanner but it costs almost 80 quid.
Can you give me more details about the spanner you bought?
--
Rgds,
Roman (London, UK)
'92 HDJ80
 
Thanks, Ian.
Trouble is they are either sold in the USA or of a different type
(socket not box).
--
Rgds,
Roman (London, UK)
'92 HDJ80
On 11/22/05, Ian Packer <[Email address removed]> wrote:
e&n=3D228013&%5Fencoding=3DUTF8&v=3Dglance
ve.php
i
ox
 
Don't like the adverts?  Click here to remove them
http://www.thetoolwarehouse.net/shop/OTC-6612.html
Ian Packer wrote:
>http://www.amazon.com/gp/product/B0...529?v=glance&n=228013&_encoding=UTF8&v=glance
>
>http://www.dealclick.co.uk/product/207947/ELORA-54Mm-Bi-Hex-Socket-3-4Drive.php
>
>http://www.thetoolwarehouse.net/shop/TTW406.html
>
>
>----- Original Message -----
>From: "Roman" <[Email address removed]>
>To: <[Email address removed]>
>Sent: Tuesday, November 22, 2005 1:30 PM
>Subject: Re: [ELCO] 54 mm socket
>
>
>On 11/14/05, DAVE ROBERTS <[Email address removed]> wrote:
>
>
>>good evening,
>>Re; 54mm socket, i assume it's for the wheel bearing's on a lc 80 if so i
>>recently purchased one from a builders merchant's in wrexham, cost approx
>>?20 it took only a day to get it, any body needs the address it's
>>F.W.B
>>FIVE CROSSES INDUSTRIAL EST.
>>COEDPOETH,
>>WREXHAM.
>>LL11 3RD
>>PHONE 01978 720720
>>FAX 01978720721
>>Hope this might of some use you.
>>
>>
>
>
>Hello Dave,
>
>I've spoken to these guys and was toild they only have a 50mm/55mm box
>spanner but it costs almost 80 quid.
>
>Can you give me more details about the spanner you bought?
>
>--
>Rgds,
>Roman (London, UK)
>'92 HDJ80
>--
>European Land Cruiser Owners Mailing List
>Further Info: http://www.landcruisers.info/lists/
>
>--
>European Land Cruiser Owners Mailing List
>Further Info: http://www.landcruisers.info/lists/
>
>
>
>
>
 
Hello guys,
I rang Snap-on about availability of the 54mm box spanner - 2-4 weeks
lead time and only 3/4" size. Price ca. =A322.
Still searching for a 3/8" or 1/2" version.
--
Rgds,
Roman (London, UK)
'92 HDJ80
 
Hey Roman
I bought the 54mm socket from ebay a while back. Ill see if I can find the
sourse but it is American but still I think good and cheap. Ill check in the
morning .
Cheers
John C
92HDJ 80 1HDT Ireland
 
Why not use this with a 3/4 socket ?
http://www.justoffbase.co.uk/s.nl;jsessionid=3Dac112b1e1f4304ff1eff9ba3462
5a2cc9b3e1093e411.qQvJq2PEmlnva30Q-BbQmkLz-ATzr6Lzn6rzqwTxpQOUc30KaNDNo6
XKq6zInRmLa3mT8RbCpR0HoA5Qmh0KbwTNo6XK-kDvrA4Ka3mIqRnvp6iIpAjOp6jynQjM-A
bJpgaLc3eOc3eMbx0xf2bCpQPz8QfznA5Pp7ftolbGmkTy?sc=3D9&category=3D657&it=3DA&id
=3D10254
Rob
(Sorry about the long address)
-----Original Message-----
From: [Email address removed] [mailto:[Email address removed]]
On Behalf Of Roman
Sent: 23 November 2005 23:34
To: [Email address removed]
Subject: Re: [ELCO] 54 mm socket
Hello guys,
I rang Snap-on about availability of the 54mm box spanner - 2-4 weeks
lead time and only 3/4" size. Price ca. =A322.
Still searching for a 3/8" or 1/2" version.
--
Rgds,
Roman (London, UK)
'92 HDJ80
 
Thank god for TinyURL,
Try this with your 1/2 drive socket set
http://tinyurl.com/ajqa4
Rob
-----Original Message-----
From: [Email address removed] [mailto:[Email address removed]]
On Behalf Of Roman
Sent: 23 November 2005 23:34
To: [Email address removed]
Subject: Re: [ELCO] 54 mm socket
Hello guys,
I rang Snap-on about availability of the 54mm box spanner - 2-4 weeks
lead time and only 3/4" size. Price ca. =A322.
Still searching for a 3/8" or 1/2" version.
--
Rgds,
Roman (London, UK)
'92 HDJ80

--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.362 / Virus Database: 267.13.7/180 - Release Date:
23/11/2005
 
On 11/24/05, Rob Edwards <[Email address removed]> wrote:
Rob
3/4 is OK, too. Actually I already have one, from Draper or similar.
But it's damn too heavy to
carry it in the toolbox.
--
Rgds,
Roman (London, UK)
'92 HDJ80
 
Can you share your contact details for Snap-On...
On 23/11/05 23:34, "Roman" <[Email address removed]> wrote:
Jeremy Llewellyn-Jones
Mob: 07831 458 793
--
 
Roman,
Dana has promised to look into other suppliers of 54mm 1/2" hub sockets
in the US and then shipping them over, but I doubt that they will get
here in time for your trip.
--
Regards,
Julian Voelcker
Mobile: 07971 540362
Cirencester, United Kingdom
1994 HDJ80, 2.5" OME Lift
 
Roman,
Dana has promised to look into other suppliers of 54mm 1/2" hub sockets
in the US and then shipping them over, but I doubt that they will get
here in time for your trip.
--
Regards,
Julian Voelcker
Mobile: 07971 540362
Cirencester, United Kingdom
1994 HDJ80, 2.5" OME Lift
 
Hey Roman
If you cant get or dont get the 54mm hub socket in time for your trip let me
know.
Ill post mine over to you and you can have it for a loan and post it back
when your finished with it. So no need to worry at all.
Cheers
John C
92HDJ 80 1HDT Ireland
 
John,
That's most generous of you. Thanks for the offer. I'll keep you posted.
--
Rgds,
Roman (London, UK)
'92 HDJ80
On 11/24/05, John Byrne <[Email address removed]> wrote:
me
 
Back
Top