Butt cheeks need new hdj80 block!

G

Guest

Guest
Oh the guys this is the sad tail. Well I go see my friend who have
garage and we take off my cylinders head. Alll is look good EXCEPT
there is some play wiggling pistons around in boring. THey wiggle up
and down and left or right. They is some worn off areas of X-honing
(de-glacage) but they is not on left and right, they are frong and
back! Go to explain that yourself, x-honing worn shiney on back of
boring but not on sides where you expecte to see is some worn with
time.
So the guys I have some big pistone slapping that makes those scarey
noises, for that I take engine apart and find this bad news. We can do
two thing:
1. Put out pistons, examine them axes closely, make new boring and
X-honing at machinist, buy and put new biggest pistons, make cylindre
head all new by machiniste guy, put all back together, hope we did all
correct not like drunk monkeys.
2. Buy brand new block-rodded (short rod?) from Toyota seller for
+4000Euros, make cylindre head all new by machiniste guy, put all back
together, hope we did all correct not like drunk monkeys. Oh the guys
they make thme new origine Toyota block-rodded now in Belgique not in
Japon! I wanted to see little Japon guys in white coats like in the
publications about Toyota qualit=E9. So instead some Belge guys with
there beer and frites. Euope uber alles.
Oh then consider the butt cheeks come toujours in two, the turbo is
also show play on input side I wiggling it with our fingers and oh you
can so feel it play, so we think to ourself is stupide to mount up all
new motor with slopping turbo. Voila some more hundreds Euros going
away.
Voila today I not even look at my banque manager from shame, she will
ongulate me when I pay for this all.
Whaat you think the guys? Fix up my block-motor or buy brank new
block-rodded from Toyota Yaris pimple young pieces guys?
 
G

Guest

Guest
Whaat you think the guys? Fix up my block-motor or buy brank new
block-rodded from Toyota Yaris pimple young pieces guys?
--
Hi Benoit
just take a look here-it is in Belgium though:
http://www.hvd-japanparts.com/
[Email address removed]
I hope you'll find what you're looking for and much cheaper ;-)
best regards
Lubo
 
G

Guest

Guest
Hi Benoit,
Give Maarten at http://www.all-american.nl a call - he sells Toyota
Short Blocks a lot cheaper than local dealers as well as sells a Sport
Turbo which is stronger than the factory one and also cheaper.
Do mention the list when you ring and let us know how you get on.
--
Regards,
Julian Voelcker
Mobile: 07971 540362
Skype: julianvoelcker
Cirencester, United Kingdom
1994 HDJ80, 2.5" OME Lift
 
G

Guest

Guest
Oh thank you the guys and Julien for this tips. I am so sad about my
motor block. Seeing these big pistones wiggle so far and easy with my
finger make me want to empty my stomache out.
I am wait for Maartin to answer email now today.
SNIPM
 
Don't like the adverts? Remove them by becoming a supporting member.   Click here
G

Guest

Guest
but he speaks English!!!!
regards
Lubo
----- Original Message -----
From: "Benoit Bernard" <[Email address removed]>
To: <[Email address removed]>
Sent: Friday, August 10, 2007 12:21 PM
Subject: Re: [ELCO] Butt cheeks need new hdj80 block!
 
G

Guest

Guest
Benoit
Re> Whaat you think the guys?
What about getting a second-hand engine - you should get one for under
1000 euro
Niall
HDJ80 - with second-hand engine
 
G

Guest

Guest
Hi then Niall that is some thing to thing about, you are right. But I
hear from Maarten that hdj80 moteurs have come now with 3 new revised
levels from Toyota! So with new block I get better internals pieces
even then my 80 moteur when is was new in 1992. Maartin also have
stronger turbo and kit for pose intercooler too. Good think I have
good job to pay for all this toys upgrade.
 
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock    No Thanks