So now that I have a 90, I am looking to fit my CB into the 1 DIN slot below the radio. How does one take the dash apart? I am sure that there are a few screws, but being lazy so looking for someone's experience....
Thanks
Thanks
Ecky Thump said:It is a 2-DIN hole for the larger units. I fitted a Sony in the wife's 90 and transfered it to the 80 no issues.
Trouble with fitting a CB is if the CB is single DIN and so is the radio the hole is slightly less deep than needed. I had to shave off about 2mm of the surround in my 80 to fit both in. The hole in the dash behind the panel is plenty big enough for 2 x single DIN if you need it.
Might be. This is what I have now. There is a box below the radio e.g. for sunglasses, but when removed, the hole is not as wide as the upper DIN hole.sae70 said:Must be the left hand / right hand drive thing
sae70 said:What will you do with all of your heater controls then KZJ