Don't like the adverts?  Click here to remove them

front bumper

G

Guest

Guest
Hi guys
It looks like the insurance company will cover my front bumper so I
wonder if the bumper from LC HDJ100 will fit?
Just because the lights it has...
Cheers
Lubo
 
G

Guest

Guest
Hi Lubomir,
Don't think so. I believe that there are differences in the width of
the car at the front although I think the chassis members are in the
same place
--
Regards,
Julian Voelcker
Mobile: 07971 540362
Skype: julianvoelcker
Cirencester, United Kingdom
1994 HDJ80, 2.5" OME Lift
 
G

Guest

Guest
Hi Julian
Toy guys also suspect that :-((((((((((((
cheers
Lubo
On Aug 8, 2006, at 7:01 PM, Julian Voelcker wrote:
> I believe that there are differences in the width of
> the car at the fron
 
G

Guest

Guest
Hi Guys
Anyone any idea where to get a new front OEM bumper apart from Toyota of course.
cheers
john
 
G

Guest

Guest
Oh now John what new problem did cause you to need a bumper? Did y ou
run over a Yaris???
2008/4/26 john byrne <[Email address removed]>:
 
G

Guest

Guest
Hey Bernard
No problem with the Yaris or any other thing really.
Its just I was brousing the web and found a place in the USA that has the
bumpers cheap.
But the problem is the shipping, its costly so just wanted to know if
anyone here knew where to get them cheaply.
cheers
john 92HDJ 80 1HDT
 
Don't like the adverts?  Click here to remove them
G

Guest

Guest
I badly bent mine on a tree, but once removed it seemed to respond to
sledgehammer surgery quite well...
Incidentally, are there two types of OEM front bumpers for 80s - one
long enough to take a winch underneath and one that sits closer to the
end of the chassis rails? I remember driving FJ75s for work years ago
and some had the factory winch bumper that added about a foot to the
overall length of the vehicle. (My employers were too pikey to spec the
actual winch that went with it though)
Cheers
Paul
1996 Yellow FZJ80
john byrne wrote:
 
G

Guest

Guest
Paul.
The bumpers are the same depth, what changes are the bumper irons, which are approx 1 inch longer.
There are two bumper centre sections, one with a cutout for the fairlead and one without.
Cheers
Andy Harvey
Cheltenham, UK
--------------------------------
Date: Mon, 28 Apr 2008 19:46:49 +0100
From: Paul Harper <[Email address removed]>
Subject: Re: [ELCO] front bumper
Reply-To: [Email address removed]
I badly bent mine on a tree, but once removed it seemed to respond to
sledgehammer surgery quite well...
Incidentally, are there two types of OEM front bumpers for 80s - one
long enough to take a winch underneath and one that sits closer to the
end of the chassis rails? I remember driving FJ75s for work years ago
and some had the factory winch bumper that added about a foot to the
overall length of the vehicle. (My employers were too pikey to spec the
actual winch that went with it though)
Cheers
Paul
1996 Yellow FZJ80
 
Top