chris lc90
Active Member
- Joined
- Aug 18, 2010
- Messages
- 88
i used the material 5083 and copy pattern from asfir's (photo)..
so i made mine with 50 euro..
remaining only to finish the steel angle bar that protected the chasis and support the skid plate..
http://s815.photobucket.com/albums/zz71 ... 20alu5083/
in the position that is the red marker ,is going to open holes and install tie rods to the existing original support holes with thread for more strength
so i made mine with 50 euro..
remaining only to finish the steel angle bar that protected the chasis and support the skid plate..
http://s815.photobucket.com/albums/zz71 ... 20alu5083/
in the position that is the red marker ,is going to open holes and install tie rods to the existing original support holes with thread for more strength