Don't like the adverts?  Click here to remove them

Good source for used Alloys/Tyres

G

Guest

Guest
Hi List,
I have been looking around on the internet for a decent set of alloys for my
100 Series Amazon. All I can find is bling bling. Anyone know of a good
source either online or other? They don't have to be original Toyo rims but
would like them to be subtle (and cheap)! I bought the LC with a set of rims
and chunky tyres which I would like to take off and keep as spares for off
roading.
I believe it has a 5/150 fitment, not sure about the offset. 18 inch or so
would be nice. I have been scanning ebay for a while now with no luck.
Any pointers much appreciated.
Anjam
1999 100 Series VX Limited (Import)
 
http://cgi.ebay.co.uk/LANDCRUISER-V...yZ108856QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
http://cgi.ebay.co.uk/4x4-wheels-wi...oryZ9888QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
http://cgi.ebay.co.uk/TOYOTA-LANDCR...ryZ28648QQssPageNameZWD1VQQrdZ1QQcmdZViewItem
http://cgi.ebay.co.uk/Toyota-Landcr...oryZ9888QQssPageNameZWD1VQQrdZ1QQcmdZViewItem
Hi Anjam,
A quick trawl on ebay threw up the above links, may be something suitable
there.
TTFN
Chas
----- Original Message -----
From: "Anjam Sohail" <[Email address removed]>
To: <[Email address removed]>
Sent: Tuesday, August 08, 2006 11:08 AM
Subject: [ELCO] Good source for used Alloys/Tyres
 
Thanks for the links Chas, unfortunatly I have been trawling ebay for weeks
now. All those are 6 stud whereas I am looking for 5 stud.
Regards,
Anjam
 
Anjam,
To reduce the burden of "trawling" have you set up a saved search on
EBAY? Makes life easier. BTW I realise that it is your choice but the 18
inch option for wheels will greatly reduce your options for both wheels
and especially for tyres when compared to the std 16 inch diameter.
Regards Gareth Jones. '97 I-HDFT - Hannibal roof rack, 285/75 x 16
BFG AT, 3 inch S/Steel exhaust, custom built winch bar and milemarker
winch. Newport - S. Wales.
( I think that has got my signature to the correct format Julian !!)
 
Gareth,
I have searches setup but they don't come up with much. I still trawl incase
someone hasn't got the proper associated keywords. Sometimes people sell
alloys where they don't know what car they will fit etc.
18 inch would be nice to have but like you say I am limiting my options. I
would be happy to go with decent 16 inch if I come across any.
Back to my search,
-----Original Message-----
From: [Email address removed] [mailto:[Email address removed]] On
Behalf Of Gareth Jones
Sent: 08 August 2006 11:57
To: [Email address removed]
Subject: RE: [ELCO] Good source for used Alloys/Tyres
Anjam,
To reduce the burden of "trawling" have you set up a saved search on EBAY?
Makes life easier. BTW I realise that it is your choice but the 18 inch
option for wheels will greatly reduce your options for both wheels and
especially for tyres when compared to the std 16 inch diameter.
Regards Gareth Jones. '97 I-HDFT - Hannibal roof rack, 285/75 x 16 BFG AT,
3 inch S/Steel exhaust, custom built winch bar and milemarker winch.
Newport - S. Wales.
( I think that has got my signature to the correct format Julian !!)
--
European Land Cruiser Owners Mailing List Further Info:
http://www.landcruisers.info/lists/
 
Back
Top