Hub nuts not wheel nuts

[Guest]

Hi Julian/All
I meant to tell you that in my excitement to re assemble my hub I forgot to
slacken off the inner nuts preload and guess what it got very hot driving
down to the coast and back. Oops. I hope I have not damaged anything in
there???
Will pull it apart tonight to have a look......
Regards
Simon Hughes

 

[Guest]

Hi Simon,
I guess you should be OK - if it was very hot I would be tempted to replace
the grease, otherwise just follow the torque, spin, torque, spin, etc
tightening up procedure again.
--
Regards,
Julian Voelcker
Mobile: 07971 540362
Cirencester, United Kingdom
1994 HDJ80, 2.5" OME Lift