wow...I was blown away!could never do this alone,but thanks Miha-nice to
know that is possible
cheers
Lubo
On Mon, Nov 30, 2009 at 9:39 PM, Miha Vovk <[Email address removed]> wrote:
> Here are two links to DIY heated mirors. Second is on FJ Cruiser but the
> procedure is basicly the same. Hope it helps.
> Regards, Miha
> 1996 HDJ80, ARB front, DIY rear, OME, BFGs,...
>
>
>
>
http://forum.ih8mud.com/80-series-tech/268442-heated-rearview-mirrors-finished.html
>
>
http://www.fjcruiserforums.com/foru...heated-mirrors-modification-installation.html
>
>
> On Mon, Nov 30, 2009 at 8:51 PM, Lubomir Kolev <[Email address removed]>wrote:
>
>> Ok!as long as I could see today,and he tried to show it up for me,there
>> was something in the middle of the mirror (probably the the mechanism that
>> adjust the mirror up and down as well L,R and that supposed to be the
>> obstacle to glue the elements...:-(
>> but I'm not giving up yet!Thanks for the help,Chris!
>> cheers
>> Lubo
>> 96'HDJ80,302000km,
>>
>> On Mon, Nov 30, 2009 at 8:14 PM, Christopher Bell <
>> [Email address removed]> wrote:
>>
>>> Lubo
>>>
>>> It says that they can be cut to shape. In practice I should think a
>>> circle a bit smaller than the mirror would be good enough.
>>>
>>> By the way I haven't done this, I just did some Googling after reading
>>> your question and found other people suggesting this solution. I use a
>>> squeezy washing up bottle full of warm water, but I appreciate that this
>>> might not be good enough for Norway in winter!
>>>
>>> CB
>>>
>>> ________________________________________
>>> From: [Email address removed] [mailto:[Email address removed]]
>>> On Behalf Of Lubomir Kolev
>>> Sent: 30 November 2009 19:10
>>> To: [Email address removed]
>>> Subject: Re: [ELCO] mirrors
>>>
>>> Chris,
>>> how can be sure those element will fit our mirrors?and if the Toy guy
>>> said that it was not possible,then...have you done this yourself?of
>>> course I'm not going to do this-rather let them do it for me and pay for
>>> the service
>>> cheers
>>> Lubo
>>> On Mon, Nov 30, 2009 at 7:51 PM, Christopher Bell
>>> <[Email address removed]> wrote:
>>> Lubo
>>>
>>> You can glue a heating element such as
>>>
http://uk.rs-online.com/web/search/searchBrowseAction.html?method=getPro
>>> duct&R=0731350&cm_vc=av_uk#header<http://uk.rs-online.com/web/search/searchBrowseAction.html?method=getPro%0Aduct&R=0731350&cm_vc=av_uk#header>behind the glass.
>>>
>>> I think the biggest problem would be taking the mirror apart and
>>> re-assembling it without breaking anything.
>>>
>>> Christopher Bell
>>> ____________________________________________________________
>>> Electronic mail messages entering and leaving Arup business
>>> systems are scanned for acceptability of content and viruses
>>>
>>> --
>>> European Land Cruiser Owners Mailing List
>>> Further Info:
http://www.landcruisers.info/
>>>
>>
>>
>