Don't like the adverts?  Click here to remove them

Roof Tents, Awnings, Roof racks, and all that Jazz ..

Yep - a safari trailer - hitch up and go :)
 

Attachments

  • ImageUploadedByTapatalkHD1392157082.438021.jpg
    ImageUploadedByTapatalkHD1392157082.438021.jpg
    101.9 KB · Views: 86
  • ImageUploadedByTapatalkHD1392157089.561400.jpg
    ImageUploadedByTapatalkHD1392157089.561400.jpg
    69.5 KB · Views: 155
Gary, it's another great option although I don't like the look of that one. If I had room for one out front, I'd seriously consider it. But I need my std trailer for the quad which I am not about to part with.
 
Update,
I have a Foxwing Left Hand Awning with awning extension sitting on my office floor.
I have emailed TBR for a update, and have informed me it will be early next week to me. :thumbup:
 
Last edited:
Finally the roof bars arrive, and guess what !
The front brackets do not fit :(

THis picture shows the front bracket, with bolts not lining up :(
1926687_10151873121926673_1951196916_n.jpg
THe Middle BRacket Fits (hole centres 80mm) the rear bracket fits (hole centres 80mm) but the hole centres for the front bracket need to be 70mm ?!!
 
Last edited:
Finally the roof bars arrive, and guess what !
The brackets are For a Corrado ! grrrrrr

THis picture shows the front bracket, with bolts not lining up :(
View attachment 11766

Are they all like that? The front holes alongside the sunroof have a different spacing and are not used. The holes just behind the sunroof are the ones you want and they are covered over by the black trim piece so you need to take that off to gain access. What model does the packaging say they are for, or what part number are they?
 
Jon.. you are a star !
I just had to go out in the rain and check, I pulled up the gutter trim which is black stainless steel. About 5 inches to the rear of the existing front holes, there is another two holes ! Yes 80mm centres !
Problem sorted !
Thank you !
 
Don't like the adverts?  Click here to remove them
Back
Top