Roofracks and Ladders

G

Guest

Guest
Thanks for the tips Roman,
That's right! I remember with the 60 series, the new roofrack didn't fit
100%, so a big guy with a huge hammer limped outside, banged it in a few
places, and it fitted perfectly!
How did they fit the ladder onto your cruiser? In 2 bits, presuming you've
got a horizontal tail gate? Or just fitted to the top half?
--
Rgds,
Dennis - London
'96 1HD-FT
The Royal Bank of Scotland plc, Registered in Scotland No. 90312. Registered Office: 36 St Andrew Square, Edinburgh EH2 2YB
The Royal Bank of Scotland plc is authorised and regulated by the Financial Services Authority and represents The Royal Bank of Scotland Marketing Group. The Bank sells life policies, collective investment schemes and pension products and advises only on the Marketing Group's range of these products and on a With-Profit Bond produced by Norwich Union Life (RBS) Limited.
This e-mail message is confidential and for use by the addressee only. If the message is received by anyone other than the addressee, please return the message to the sender by replying to it and then delete the message from your computer. Internet e-mails are not necessarily secure. The Royal Bank of Scotland plc does not accept responsibility for changes made to this message after it was sent.
Whilst all reasonable care has been taken to avoid the transmission of viruses, it is the responsibility of the recipient to ensure that the onward transmission, opening or use of this message and any attachments will not adversely affect its systems or data. No responsibility is accepted by The Royal Bank of Scotland plc in this regard and the recipient should carry out such virus and other checks as it considers appropriate.
 
G

Guest

Guest
Hi Roman,
Out of interest, what sort of cost was the rack and ladder?
--
Regards,
Julian Voelcker
Mobile: 07971 540362
Cirencester, United Kingdom
1994 HDJ80, 2.5" OME Lift, ARB
 
G

Guest

Guest
On Mon, 31 Jan 2005 15:22:23 GMT, Julian Voelcker
<[Email address removed]> wrote:

Julian ,
I can'tt remember precisely, but it was ca =A3250 - 270. Note that both
items were delivered in bare metal form and I had them coated
separately.
--
Rgds,
Roman (London, UK)
'92 HDJ80
 
Don't like the adverts? Remove them by becoming a supporting member.   Click here
G

Guest

Guest
That sounds really good.
Do you have any other pictures?
Also, do you recall what the finish cost?
--
Regards,
Julian Voelcker
Mobile: 07971 540362
Cirencester, United Kingdom
1994 HDJ80, 2.5" OME Lift, ARB
 
G

Guest

Guest
On Mon, 31 Jan 2005 16:27:41 GMT, Julian Voelcker
<[Email address removed]> wrote:
Julian,
Hot dip galvanising.was ca 45 quid but there are very few galvanising
workshiops , particularly in London, that accept large items. I had it
done by
Joseph Ash Galvanizing
Tel: (020) 7987 5070
Fax: (020) 7515 7498
Poplar Works, Leven Rd, London E14 0LP
Powder coating as =A375-80 quid done by
Goldrose
Park Avenue
London NW10 7XH
Tel: 020 8965 4737
More pics showing the roofrack and some details
http://www.zen59375.zen.co.uk/public/images/P1010033.JPG
http://www.zen59375.zen.co.uk/public/images/P1010004.JPG
http://www.zen59375.zen.co.uk/public/images/P1010005.JPG
--
Rgds,
Roman (London, UK)
'92 HDJ80
 
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock    No Thanks