TOMMY 80 SERIES
New Member
- Joined
- Jul 22, 2021
- Messages
- 1
- Country Flag
Hi all.
I have a 91 80 series with the 1HDT and early hyd trans in it. engine died(long Story) but have got a hold of a 1HD-FT with a part elec with switchable OD A442F trans with it with engine and trans wiring loom.
My issue is the shifter, have got one from a 95 cruiser with the push button OD button on it but by the look of it the plugs on it are different from the factory plug and they go back down into the main body loom, was told the trans loom would support this but it seems thats not the case
Any advise or wisdom would be greatly appreciated. some one may have done this conversion before .
Cheers
Tommy
I have a 91 80 series with the 1HDT and early hyd trans in it. engine died(long Story) but have got a hold of a 1HD-FT with a part elec with switchable OD A442F trans with it with engine and trans wiring loom.
My issue is the shifter, have got one from a 95 cruiser with the push button OD button on it but by the look of it the plugs on it are different from the factory plug and they go back down into the main body loom, was told the trans loom would support this but it seems thats not the case
Any advise or wisdom would be greatly appreciated. some one may have done this conversion before .
Cheers
Tommy