G
Guest
Guest
When the Racor filter unit posts were around I had a quick look at the Racor
site and noticed the make a unit that has an integral 300W heater element -
anyone used on and would it help?
Malcolm Bagley
Stafford, UK
1975 FJ45 Pickup (In Work)
_______________________________
So I bumped it up to about 70% a few weeks ago. Then I ran into minor
trouble. Morning starts became lumpy, and idle stayed low/lumpy for about
10 minutes until the cylinder head etc all got nice and hot. This indicates
to me that my injection pump was having trouble pumping the less-fluid
canola thru the injectors. Duhhh ... I is a college graduate ...
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.405 / Virus Database: 268.12.2/442 - Release Date: 08/09/2006
site and noticed the make a unit that has an integral 300W heater element -
anyone used on and would it help?
Malcolm Bagley
Stafford, UK
1975 FJ45 Pickup (In Work)
_______________________________
So I bumped it up to about 70% a few weeks ago. Then I ran into minor
trouble. Morning starts became lumpy, and idle stayed low/lumpy for about
10 minutes until the cylinder head etc all got nice and hot. This indicates
to me that my injection pump was having trouble pumping the less-fluid
canola thru the injectors. Duhhh ... I is a college graduate ...
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.405 / Virus Database: 268.12.2/442 - Release Date: 08/09/2006