Don't like the adverts? Click here to remove them
Rodger's latest activity
-
Rodger replied to the thread Disc Brake Conversion for BJ40?.Spoke with mate about 60 series axle and he hasn't got any and they are getting hard to find but he said if you have fine spline shafts... -
Rodger replied to the thread Long time lurker (kzj78 / uzj100 / uzj40[?]).Hi Alex and welcome... What is the thread title on i8mud for the UZJ40? I haven't seen that one and would like to... That's a major...
-
Rodger replied to the thread Disc Brake Conversion for BJ40?.I have had a look in my photo archive and have attached a few... mainly to remind Ros of that trip... We were at 2600 metres but...
-
-
-
-
-
Rodger replied to the thread Disc Brake Conversion for BJ40?.Oh Wow! I hadn't made the connection. We have very fond memories of that trip and remember Ros, who seemed quite taken with our 40 at...
-
Rodger replied to the thread Oil pressure release valve.That sounds very odd... Have you compared the compressed length of the springs?
-
Rodger replied to the thread Disc Brake Conversion for BJ40?.Leave it with me and I'll see what I can find. It would undoubtedly involve a trip to the UK, is that ok?
-
Rodger replied to the thread Disc Brake Conversion for BJ40?.I have 60 series axles on my 40 but it is somewhat modified but you are right the 60 series axle is 70mm wider but otherwise the parts...
-
Rodger replied to the thread Irish BJ40 Resto.Also, on this side, there is www.euro4x4parts.com. For parts in Canada, Spectre Offroad - sor.com - do ship to Canada at reasonable...
-
Rodger replied to the thread 72 FJ40 Hand brake switch.Electrics are not a strong point for me but I do have a wiring diagram for 72-73 FJ40. I will scan this for you if you don't have one...
-
Rodger replied to the thread HJ45-LP KW - Sweden.Hi Jesper, For the fuel filter housing try www.megastore4x4.pt as they have some parts for the H engine and they may have good second...
-
Rodger replied to the thread BJ40 Flywheel Torque Setting.Apparently the setting is 130 ft lbs according to the Toyota manual but I've only got that from a search on I8mud forum and several on...
-
Rodger replied to the thread BJ40 Flywheel Torque Setting.Sorry I haven't found the ft lbs for a B series but 130 sounds far too high - on the F series it is 47 ft lbs and on a 2H it is 87ft...
