Don't like the adverts?  Click here to remove them

Recent content by amacatan

  1. images-1_zpsd291e762.jpe

    images-1_zpsd291e762.jpe

  2. 20150118_123537_zpse69c151c.jpg

    20150118_123537_zpse69c151c.jpg

  3. 20150118_123532_zps2bc966c8.jpg

    20150118_123532_zps2bc966c8.jpg

  4. 20150118_122913_zps1e76b26f.jpg

    20150118_122913_zps1e76b26f.jpg

  5. DSCN5030.jpg

    DSCN5030.jpg

  6. SDC10342.jpg

    SDC10342.jpg

  7. A

    Erratic rough idle

    Is it possible to have an injector that is bad and not have a check engine light?
  8. A

    Erratic rough idle

    Thanks induna! I have cleaned the MAF sensor with no positive results. Could you post pics on where the intake air temperature sensor is? There are no codes returned when I had it checked using obd ii.
  9. A

    Erratic rough idle

    Hi all, I have a 90 series 5VZFE Prado which erratically experiences rough idling (or misfiring). I have tried everything that may cause the problem as follows but still no luck: - New spark plugs - New spark plug wires - New ignition coils (x3) - New fuel filter - New fuel pump...
  10. A

    DIY Honeycomb Grille

    . . . BEFORE . . . AFTER . . . I used this material, spray-painted black then attached it in the rear of the grille using cable ties :icon-biggrin:
  11. A

    I want a stiffer ride at rear for Prado 90 series

    Thanks for the replies. What brands or types of springs can you recommend which is compatible with the 90 series prado?
  12. A

    I want a stiffer ride at rear for Prado 90 series

    Hi, I recently installed a rear tow bar / bullbar to our car, now the problem is that the ride bacame too soft that having 3 people causes the rear to go all the way to the stopper during slight bumps due to the added weight. Could anyone recommend a stiffer set of shocks can put in the rear...
  13. A

    Overly active LSD - anyone experienced this?

    UPDATE: I have put in a fresh batch of Castrol Axle Limited Slip 90 Oil plus 2 bottles of Redline Friction Modifier Additive. Problem still persists. What's next? I am now inclined to follow my mechanic's suggestion of totally removing the spring in the LSD to alleviate torque. But before I...
  14. A

    Overly active LSD - anyone experienced this?

    Thanks for the reply. I'll try adding a bottle of friction modifier. I hope this works
  15. A

    Overly active LSD - anyone experienced this?

    Yes. We have removed the rear prop and the problem is still there. What do you mean by bodging springs?
Back
Top