Recent content by Bullet Proof

Yep then also - no have.

Sorry cant read the post? No joy with cruiser parts Was going to have one made but the US has no thin flat glass to make one, all to thick so original is best bet. Cheers

Looking for a sock glass for my Australian 1982 FJ45 left door (pass side). Door has a wing vent so it would be the more square style glass. Just need the one without scratches and no chips in the surface or corners. See picture. In the US so will pay the shipping. PM me Thanks

Yes se makes the rounds almost every year. Only if they let me fly it would I be a happy man. Still nice to look at. Usually parked outside my hangar.

Already have but no response in the last seven days. Cheers

I'll give them a look up. Yes one would think so but when you say Toyota instead of Dodge or Chevy they tend to shy away. Cheers

Yes I would of thought also that I could have one made but as of now and after contacting three of the primer radiators shops in the US, none have even returned anything. Not that easy trust me seems as no one localy eve wants to work with me on this, so looking for new.

Wanted 1978-1985 FJ40 Radiator support and shroud standard 22" wide. Thanks

I have a 1982 Fj45 from NSW Australia and it is a real bad radiator that needs to be replace. Found out that the radiator is not the 22" wide standard 40 series but is 23.5" wide as is the core support, it was mad to accommodate a A/C set up. Apparently they installed them in most all 45s even...

Yes thickness is a must, the one's I am having made are 9.525mm. The universal types are much less in thickness and do tend to warp fast.

Found several sized generic three bolt type,s but yes with out the recess area and they all do not fit the size needed for some of the stock exhaust hangars on some of the Toyota (hole to hole). Also most all are very very thin, hence a $4 flange. The recess is 2mm deep on both sides of the...

Seems this is an Item that just can't be found anywhere. The flanges work much better that the flat type flange/gasket as in sealing. My old flanges are 35 years old and were barely still sealing, just rusted out due to time. Toyota made a good flange with the aid of the round donut gasket...