Hi there I went through something not too dissimilar with mine for the last 4 months ,ok on tickover or low revs but no power and lots of smoke
I changed all sensors on vacuum etc plus injectors
Turn out to be the fuel filter , spurious
Changed for a Toyota one
All good now flying it .
Just...
Hi mate I haven’t reinstated yet
Latest from this saga is I wondering if the trans mission speed sensor has anything to do with my problems but the black smoke towing doesn’t point that way , however I’m hanging all sensors just to eliminate possible causes
I’m going to do the valve clearances...
Thanks beau
I must ask about and see who might have a boost gauge
The other thing I have found is the obd in by the brake pedal has no power to it
I will have to chase the power , as the fuse is ok
Hi there thanks
Good to hear the pump is rarely wrong
My reason for thinking pump is when I feel the diesel supply lines no 3 is weaker than 1 And2 as in , the bang- pulse vibration
I have already changed the injector
So now I’m going to swap 1 and 3 to see if the problem is still on 3 or in...
Thanks mate , but I have change injector 3 as the pulse through the feed pipe felt different to the bang/ pulse of the others and it seem to run a bit better well at least on 6 now
But it won’t pass 75 mph even though kick down seems to work it drops back
I’m going to swop 3 and 1 next just to...
HiHi mate sorry for late reply
Have now changed out an injector that the shop sent back to me as one of mine but a wrong number on the body and they won’t accept responsibility as I should have double checked
Anyway I fitted a secondhand injector and it’s running much better but will not pass...
Hi mate sorry for late reply
Have now changed out an injector that the shop sent back to me as one of mine but a wrong number on the body and they won’t accept responsibility as I should have double checked
Anyway I fitted a secondhand injector and it’s running much better but will not pass 74...
Wow thanks for the very in depth reply it certainly gives me more to think about , I had to reroute the vacuum piework when I eliminated the Ger by blanking it so I will go over that again , is there an after blanking diagram available for that I wonder
Now the turbo is something I haven’t even...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.