Don't like the adverts?  Click here to remove them

Recent content by michael

  1. DSC01597.jpg

    DSC01597.jpg

  2. DSC01590.jpg

    DSC01590.jpg

  3. M

    Whine!!!!!

    I did mine and it does really work whoever found it was a bloody marvel it was driving me mad
  4. M

    I need a new universal joint........BUT...

    Hi I`ve just done mine it was the rear one on the front prop but just the same I got mine from milners and it went in quite easily I had to use the vice mind which is a big old heavy duty one to press them in But it was a bit of bugger getting the old ones out as it was completely dry and...
  5. M

    Pimp my ride !

    Thanks for that Ed but it would probably be a waste of £40 as the dogs are in there most of the time in ours but a good find for anyone who wants one :thumbup:
  6. M

    Pimp my ride !

    We had ours done in a range rover we had they were good for the dogs in summer as they kept it cooler and the strong sun off them,and good for a bit of security if you haven`t got a load cover in the back which most of us haven`t in the 90s I`d guess but I must admit I wasnt a lover of them...
  7. M

    Vibrating /grinding noise ?

    A good advert for greasing the uj`s dont you think, I dont think the last owner bothered much
  8. M

    Vibrating /grinding noise ?

    Hello I managed to get the uj changed and its sorted all my noises and vibrating , thanks for all the advice and help. This is what was left of the uj
  9. M

    Stainless steel exhausts

    I`ll be getting back under mine hopefully this weekend (weather permitting )so I`ll have a look at the exhaust and add to the list if I need one ,if thats ok thanks
  10. M

    Vibrating /grinding noise ?

    Hello after a lot of advice I think I`ve found my problem it looks like the uj on the front prop before the transfer box is jiggling about all over the place I think its knackered :thumbdown: so I`ll be changing it as per bob murphys pictures on the other side :shhh:
  11. M

    What size hex socket for front diff drain plug?

    Your right with 10 & 12 I did mine thursday. 24mm socket for rear Probably not the place but I was sorry to hear of your disaster chris , up and onward though hey
  12. M

    Vibrating /grinding noise ?

    Hello I cant get at the truck while tomorrow as the wife has it then I`m going to do a few checks highlighted by bob murphy I`ve also just got a new cartridge of grease so I`m going to do all the grease points and I havent tried it on the motorway since I changed the diffs and transfer box oils...
  13. M

    Vibrating /grinding noise ?

    Hello all I was wondering if this could be anything to do with the noise ? it is the back prop from the transfer box to the rear diff. I`ve renewed the oils in both diffs (they were both full but pretty dark and the front magnet had a bit of gunk on the rear wasn`t as bad ) and transfer box also...
  14. M

    Autobox filter

    Thanks Andrew I`ve left it overnight as it happens but good to know for future reference :thumbup:
  15. M

    removing stereo

    2 screws in the top of the ashtray then 6 clips 2 at the bottom 2 in the middle and 2 at the top just pull from the bottom gently and it just pops out.
Back
Top