Recent content by Nailer

Got mine made in Dublin Yogi, I have had the factory Toyota one, an expensive Aluminium PWR rad. Currently on a 4 row core with large tubes for a fast flow and bigger integrated atf cooler, best one so far. Stopped at 4 core for fear of the fan hitting the rad, there may be more room with a...

On pricing clutches before, an optifit works out cheapest, even compared with milners. Assuming there is a genuine one in there already.

I have two d4d engines here at the house, an avensis (170,000 miles) and a rav4 (150,000 miles), both engines had blow by at the injector seals, both on cylinder no.4. There was sludge on the pick up of the rav. The blow by could be heard on both engines once the oil filler cap was removed. The...

Its Toyota's ADD system for part time 4wd IFS trucks, my old surf had it.

Too much of a charge or air in the system, a vacuum should be introduced in the system before re-charging to remove air. Also check the condition of your condenser, if the gas is not sufficiently able to disperse heat this will cause the pressure to rise. Your 89 will use r12 refrigerant which...

Thanks for the replies.

Hi Guys, I have recently completed a month long expedition in Morocco in my 1Fz powered 80. All went well except for the fuel consumption and cost of petrol on the way through europe. A gas conversion would solve this nicely but I have heard of gas converted vehicles developing head gasket...