Don't like the adverts? Click here to remove them
Nguruve's latest activity
-
Nguruve replied to the thread Heavy Steering.Hi @scooby, Sorry, I don't know about PAS details on the 120. I'd suggest starting a new thread in the "120 Series" forum. Cheers. -
Nguruve replied to the thread Heavy Steering.Hello @scooby, wow, that's a low-mileage LC4. I'm sure someone more knowledgeable will be able to help, but it is a bit of a different...
-
Nguruve replied to the thread Heavy Steering.Brief update... I've not been able to address the PAS issue yet, but the steering has gone back to normal, so it's some sort of...
-
Nguruve replied to the thread Heavy Steering.Thanks Shayne and Bob. Ball joints are definitely on the imminent to-do list, but they're not badly worn yet, just slight play. As you...
-
The lower ball joints on a '100' are thankfully different to those on a '90' with the joints in constant compression. There is far less...
-
I don't think it actually serves a purpose beyond how everything goes together on the assembly line and it should never need adjusted ...
-
Nguruve replied to the thread Heavy Steering.Thanks Shayne. What does this do? I'll go take a look and try it.
-
Nguruve reacted to adrianr's post in the thread 100 wont start - possible immobiliser issue? - FIXED with
Like.
Update. the truck is now running. leaving the batteries off for 45 mins whilst i cleaned up the brakes and handbrake on the Rav 4 made... -
Just to update the thread so for future reference of anyone searching . It turns out that the pump itself was at fault and must of been...
-
Sounds like the pas pump is sucking air and cavitating..... A leaking hose on the pressure side would be obvious but on the suction side...
-
Hello All, Just wondering if anyone has any pointers for a recent development on my 100. Yesterday the steering went quite heavy /...
-
1. I bought my first Land Cruiser a 1972 FJ40 that had been lifted with 44" Ground Hog tires in 1989. 2. I was able to buy a used...
-
Nguruve replied to the thread Front Bash Plate.
-
-
-
Nguruve replied to the thread Front Bash Plate.The basic Rival skid plate for my 100 arrived yesterday. Fairly straightforward to fit. They do well at coming up with plenty places to...
-
