Recent content by PedroAraujo

Definitely up for that! Good to see more 70 series in UK

All sorted now, it turns out it was the stalk switch that was the problem. Bugger to try and diagnose

I am using the Coopers STT Pro tires, which are pretty good, very good treat pattern.

Sounds like a plan, I should bring some boerwors and the skottel.

Thanks Towpack, Higgy, I tested the voltage again and was receiving only 10 volts. With the pump disconnected and pull the switch to activate the pump, the wipers go twice, when I connect the new pump, the wipers don't do anything. I am suspecting a problem with the electrics, is there a...

hi, I have a problem with my windscreen washer pump working slow, dribbling out of the nozzles. I measured 12v at the pump on the wiring and changed the pump, no change. The pipes are all clear so there is no blockage, cleared these with an airline. Question is, I have checked the fuses for...

Yeah, sheer luck I think, it had me worried, I thought it might be the ECU and something more sinister. My truck is 10 years old and has 50k kms as genuine kms, my suspicion is that whoever owned it before couldn't solve the problem and they offloaded it, lucky find. Now that's it's sorted ( 3...

hi, I have booked a days greenlane / navigational day from Rockingham Castle to Yarwell/ Tixover quarry through Protrax. Anyone had experience with them? Looking forward to taking my cruiser and showing some landrover owners a proper truck. Think I am ready......

Hi Ali, I used Adrian Flux for insurance, I struggled to find someone who would insure it. I had a policy with direct line for my Q7 but they wouldn't touch my cruiser

Hi John, I did manage to source the problem, it took a little while to figure out as it only started happening once the engine started warming up, my first reaction was fuel but it turned out to be the coolant sensor believe it or not. This took me about a week to solve, the thing that was...

hi guys, Just filled my tank with diesel and drove 10 miles and the engine started running rough, with the engine light on solid. Any suggestions on what I need to look at? Is there a code reader that I can purchase to give me readings?

Roger, 100% agree. I have used POR 15 products successfully in the past, it is all down to the preparation. Using degreaser and metal prep which contains some form of peroxide, removes all oxidation and leaves it ready for the rust proof paint. I also found a product called ACF-50 penetrating...

Changed both riffs, transfer case and gear box oils today, truck has only done 50,000 kilometres from new, oils ran clear like honey. New shoes fitted all round ( Cooper Discoverer stt pros) all ready for action.

Showers and toilets a must have to intice families, would love to meet up with other cruiser owners and share stories and a few beers around a fire. Spares and workshop, even more reason to visit!