Recent content by Philip amos

  1. Philip amos

    Rear aircon pipes

    Does anyone by chance know the length of the rear aircon pipes starting from the joint just under driver seat, my trolley jack has just failed so can’t get under vehicle and I want to make up foible hoses
  2. Philip amos

    100 series Air Con pipe repair

    Do happen to have the lengths by any chance
  3. Philip amos

    100-Series Inner Sill replacement

    ok just interested
  4. Philip amos

    100-Series Inner Sill replacement

    This may sound a daft question but i thougt bodywork on a vehicle with a seperate chasis didnt necessary affect mot .ie when i had a jensen interceptor a hole in sills didnt matter
  5. Philip amos

    Seat belts

    Thanks
  6. Philip amos

    Seat belts

    I want to remove my front seatbelts to send away to be re webbed. I want to fit a couple of temporary units while away , are all Amazon seat belts srs
  7. Philip amos

    Vehicle ground to a holt

    I was there I gave him the shaft and all the bits , it didn’t take him long. Apparently in Bulgaria where he’s from they machine out the slot slightly as it’s no in there opinion deep enough. That price was labour And yes snap ring had come off so I replaced hub as well as it was damaged
  8. Philip amos

    Vehicle ground to a holt

    Well had shaft replaced took 45 mins £40 well spent
  9. Philip amos

    Are there many high milage uk 100 series? 4.2 or 4.7? What's yours on?!

    Mines at 24000 miles , heads rebuilt 40000 miles ago
  10. Philip amos

    New rear springs

    Yes mine cost I think £250 with gauge and pump so I can adjust on the move
  11. Philip amos

    Vehicle ground to a holt

    Well last sunday all wel until i pulled out of garage ,then there was a horrible grinding noise from the auto box thinking gearbox had gone i went on facebook to tell my tales of whoe while waiting for AA,suddenly a member of one of the forums came to the rescue , put it centre difflockand itll...
  12. Philip amos

    New rear springs

    ok so a different kit to mine as i have ahc. Do you have onboard compressor and controls
  13. Philip amos

    New rear springs

    Ok If yo don’t mind me asking is yours an lc100 And what was costs
  14. Philip amos

    New rear springs

    It shouldn’t touch top at all it relies on the bag when pumped up spreading.between the coils . That why bump stop should be removed on the 100 it’s only cut on the 200 series. When bags not needed you just need 5psi in bags and up to 25 psi when loaded. Didn’t your bags come with Kevlar outers...
  15. Philip amos

    New rear springs

    I fitted mine inverted , however I removed the bump stops completely
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock    No Thanks