Recent content by ren

7th entry

Mine looks like it has an excessive gap and from the side it looks like it is tilted out slightly from the top but I've had no issues with it sealing. I intend to adjust the hinges as described eklsewhere on the forum as I get the classic squeak but it's a matter of having someone (likely my...

I'm in a similar situation but I suspect my rear chassis is far worse than Oli.g 's sounds, although maybe different parts, as it has not had the work done his has. My plan was inspired by the youtube video of the 90 guy doing a body lift in the street (can't recall the name at the moment...

No worries. People on here have been so helpful to me and it's nice to have the opportunity to help someone else. We had a car for years and we were sat in it one time and my daughter who was probably about 9 at the time reached across and pulled down an extra mini sunvisor that covered the gaps...

HI and Welcome. Don't worry. The system is permanent all wheel drive with a center locking differential. Forgive me for including some things you may already know but for on your smaller transfer case lever you should have the following... LL = Low Ratio Locked Center Differential N = Neutral...

Box does not need removing. You can access from the bottom. Easy to replace the solenoids. No idea of the price though. Sorry. I got gaskets for my valve body from here IIRC www.sussexautos.co.uk so they may do the solenoids. www.automaticchoice.com look like they probably do the solenoids.

It's good to see they are taking health and safety seriously by using face coverings.

Gregory's Prado 90/95 repair manual says the drive shaft retaining nut is 235Nm.

In case it helps anyone else, I have now purchased a Febest part no: 0187-FZJ80 "Pulley Tensioner Kit" which according to the info on the box does a load of Toyotas including various 90's icluding mine. A word of warning though the spindle that goes through the bearing is too short, probably...

Very true & multiple clutches.

Can't be a clutch if they are autos. Maybe a decade?

https://forum.ih8mud.com/threads/gary-rigby-aka-80breaker-garry-80breaker-com-buyer-beware.921232/

Hi. I need the pulley for the tensioner for the aircon belt and the washers that go either side plus the nut although the pulley itself is the main thing as I'm sure I can source the others easy enough. I had a mad rush job to get my cruiser "finished" Saturday as I had to go into work...

As nothing has changed at the users end and many are not having noticeable issues then maybe it is an ISP issue with the time to access something such as those slow ads that a significant part of the load time or some script or maybe a DNS the end user is using. Is it worth looking at what ISP...