Don't like the adverts?  Click here to remove them

Recent content by Screwdriver

  1. S

    Another gem from the king.

    My march 2004 lc3 is also manual 5 speed with centre and rear diff locks ,tyre on back door and has the aluminium I'd plate on n/s wing.
  2. S

    Different variations of 120 - 1KZ engines / D4D engines, 5 / 6 speeds etc... Injectors recalls etc..

    Forgot about Australian versions, I think they only got the 1kd in later euro 4 spec guise. Mine is pre August 2004 euro3 spec and according to Toyota service manual all pre August 2004 used the older mobd ecu so do not have injector compensation code function and a max injector feedback + - 5...
  3. S

    Different variations of 120 - 1KZ engines / D4D engines, 5 / 6 speeds etc... Injectors recalls etc..

    1kz-te used in the 90 series up to 2000 then replaced with 1kd-ftv as used in the 120
  4. S

    Different variations of 120 - 1KZ engines / D4D engines, 5 / 6 speeds etc... Injectors recalls etc..

    Mine is a pre August 2004 1kd d4d with the five speed manual but not sure if the same as 90.my mates 90 Colorado 2001 has the 1kd-ftv,so gearbox could be the same. Pre August 2004 european 120 ,s differ in that the ecu uses mobd protocol not eobd as post 2004. Upside is mobd models were pre...
  5. S

    Good starter but runs rough and a bit smoky until warm

    Quick update to this, I have found out after reading the 120 service manual that my local Toyota dealer and others I've spoken to were correct regarding the compensation codes. 120,s before August 2004 use the older ecu which operates on mobd not euro obd as post August 2004 models do, this is...
  6. S

    Good starter but runs rough and a bit smoky until warm

    Mines a march 2004 1kd-FTV since my earlier post I've tried versions of techstream from v8 to v16 and with my vxdiag vx nano and cheap vci mini and in every version utilities shows no option for injector compensation codes. I have spoken to my local Toyota dealer the weekend and he says they are...
  7. S

    Techstream help!!

    I only get this on ver 12 and 16 if selecting North America as my region
  8. S

    Techstream help!!

    The only way i can get these options using a version 12 and 16 is to select country as japan it connects but keeps disconnecting vehicle connection to vim. Set it for any other region and it doesn't detect my vehicle and I have to manually enter but only gives me the top and third row vehicle...
  9. S

    Techstream injector compensation codes

    Quick update the only way i can select all the vehicle options is to select japan as my country then all the vehicle info boxes are available, the only issue is with japan selected I can see compensation code option and read engine data but link to car keeps crashing, this works without issues...
  10. S

    Techstream injector compensation codes

    I have got two versions of techstream a ver 12 and a ver 16, both versions connect to my 120 and let me read all the data available. The issue I have is when I go into utilities it does not give me the option to recode injectors on either version 12 or 16. When I connect to vehicle and it asks...
  11. S

    Anyone in the wiltshire area with techstream that could check my injectors ,for peace of mind

    As title anyone in the wiltshire or local areas that has tech stream that could check my injectors for me ,cheers terry. I've ordered a lead of ebay but struggling to get an old xp laptop that has a battery that still works.
  12. S

    Good starter but runs rough and a bit smoky until warm

    Mines a 2004 d4d and I have been told my injectors if replaced would need a recode that's why I'm struggling to find someone near me to replace them as they don't have the software. 2009 models onward need a recode and injection relearn carried out. Luckily mines at 134,000 miles has only been...
  13. S

    Hi and thanks for letting me in

    Thanks for letting me in, at present own a 120 lwb d4d lc3 2004 134,000miles
Back
Top