Recent content by swampy

I was having the same sort of problem.As it turns out there is an oil pressure adjustment in the automatic box mine was to high and wouldnt always back shift unless I was towing also the TPS was only getting 1/4 throttel. I took it to a Good Transmision speacalist and got a service and...

I booked the Cruiser in for an auto service and was told that the oil pressure was to high it had been set for towing also the TPS was on its way out, only working at 1/4 revs. So now the car changes smooth and when the sensor arrives from the states I will be 100% all good. I could have brought...

I just replaced both set of lights on my 1996 80 series landcruiser the outer ones were H4 [60/55 ]12V The iner ones were H1 [ H1 x 100w] 12v I went to plasma no mods required :thumbup: That the Aussie version anyway 8-)

I found this site and thought some of you might be able to use it. http://www.shopmos.net/search?q=throttl ... 5336685215

I found this site for cheap sensors http://www.shopmos.net/search?q=throttl ... 5336685215

:thumbup: :thumbup: :thumbup:

Thanks for the input, The TPS unit is going in and out as it should. A couple of months ago I had it of and tested it. It seemed to be working as it should. So i did the carbie cleaner bit on the butterfly and sorounding area ,this seemed to help out with littel to no problems for a number of...

Any one??

Happy New Year :thumbup:

Hi Im new to your forum and im need of some help/advice I have an 1996 landcruiser 80series 4.5L petrol auto 225,000km Over the last year I have been getting a reving problem! I can start the car and it will idle at say 825rpm's hot or cold start. Then out of the blue I will be sitting at the...