Ok, here's update. If you need new converter for kzj95 right one is http://www.ebay.com/itm/251592268116?_trksid=p2059210.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT (seller is great). After replacing rad and oil I noticed that there was no oil overheating anymore. Then did first try with...
One more thing - make sure to check atf when hot, and add more atf if needed. When checking atf cold, full difference between hot - cold could be almost 1L.
We'll see how whole thing will look like after rad, converter and oil are changed and replaced. Didn't drive it much after I noticed that at fluid is in bad state so hopefully trans is still in relatively good shape (right now it shifts up and down really nicely, no bangs or anything similar).
Googled it a bit and found that stall speed should be around 700rpm lower than rpm on which engine delivers max torque. Well I allready got new converter, waiting for new rad, will change atf oil and do couple more things (replace o rings etc) and see how it works after all that. ATF oil is...
Interesting... I've read that stall speed should be around 700rpm less than rpm on which engine gives top torque? According to that I assumed that stall speed should be around 1300rpm. Can you share manual please?
What would you suggest? Mobil, Castrol, something else? Fully sintethic or mineral should be fine (found in local store Mobil dex3 but it's mineral)? Guy from automatic tranmission workshop recommended mobil.
Ordered that one from ebay (floridatorque), TO61, seems the most affordable. Others either require that I send them broken converter first or shippning is absurdly high.
Thanks for infos!
Almost no acceleration, 0-100 in over 20+ seconds, increased fuel consumption, at oil overheating after two oil flushes and filter change. Odometer says 270k km, but it's more likely it has over 400k km. However trans looks fine, shifting it relatively smooth and in time, both shifting up and...
Hi,
need to replace torque converter on LC95 3.0TD 1996. Found that Dacco torque converter TO-56 and TO-61 could fit A343F automatic transmission. Does anybody know exactly which one will fit and which one should I purchase?
thanks
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.