Search results

Hi Rob, I recently had a very similar issue with my 105 with Barn Doors. Although my symptoms were a little different it's now fixed after I found multiple issues which required 1. wiring repair and 2. Replacing the body control module (BCM) behind the radio. Can I suggest that you firstly...

Yes it was quite frustrating but we live and learn! Happy days!

Hi Clive, I can't imagine being faced with your situation it must have been terrifying. Well done on your injunuity and keeping the family safe

SUCCESS!!! :):):) Thx for your help guys. After going back to the drawing board and following your suggestions I rechecked for continuity I found an open circuit in wire from the LH to RH side. On further investigation I found that the "brain surgeon" who had previously fitted the tow-bar...

Hi uHu, thx for this you might be on to something :). I had a multi meter on it yesterday and I had continuity, but just to be sure I'll double check it and also check the connectors for the coating and spring tension and see how I go Fingers crossed:), I'll report back as soon as I'm done...

Hi Clive thanks for your input buddy I'll go back to the drawing board and go through all the connections again. I have the complete interior out of the vehicle as well as the dash and all the panels etc so all the wiring is exposed. I did by the the controller second hand which I know was...

Hi all, I'm trying to resolve an issue with my rear wipers on my YM2000 Land cruiser, 4.2 Diesel, Standard with Barn doors. The issue I have is that the RH rear wiper isn't working but the LH rear and washers are working fine. I have checked for power at the connector and found no power to the...

Hi all, I'm trying to resolve an issue with my rear wipers on my YM2000 Land cruiser, 4.2 Diesel, Standard with Barn doors. The issue I have is that the RH rear wiper isn't working but the LH rear and washers are working fine. I have checked for power at the connector and found no power to the...

Various pictures my toys

My offroad trips

My build thread