Don't like the adverts?  Click here to remove them

Search results

  1. C

    Yet another Spill control question

    So, the new Spill control valve arrived,($350 ex NZ) I fitted it, primed the pump (getting good at that now) cracked the injectors and turned it over, and hey-presto! Fuel out the injectors. Tightened them, and then started again and she ran in under 5 turns!! So it was definitley the valve, it...
  2. C

    Yet another Spill control question

    correction above, not spv, actually Spill Control Valve
  3. C

    Yet another Spill control question

    Hi Beau, thanks for the idea. I checked that and it's only reading 50rpm. The needle just lifts, not quite even to the first bar. Does that mean it's not working? Is it a working or not kind of sensor? I checked codes as well, all is fine. I don't know if you guys are that familiar with the...
  4. C

    Yet another Spill control question

    So update, I have confirmed that the primer pump works well, and by opening the return banjo feed i have filled the pump and fuel filter with diesel. However, i cant get fuel to the injectors still. Ive tried cracking them open and seeing if some fuel comes out when its turning over, no luck...
  5. C

    Yet another Spill control question

    Oh wow, ok, so turbo is next. Yeah I have been suspicious of it for awhile now, im developing an oil leak there. I spoke to a diesel specialist in NZ and he told me there is a bleeder valve on top of the injector pump, just to loosen it and prime away by hand. I'll do that on the weekend and...
  6. C

    Yet another Spill control question

    We checked the primer pump was working, it was pumping fluid to the injector, but ill take your advice and do as you said, sounds like a great idea. I was vigilant in keeping it clean, but if something got in, is it a matter of disconnecting the injector lines both ends and then back flushing them?
  7. C

    Yet another Spill control question

    Hi Guys, I have been enjoying this forum a whole lot, you guys have so much information here that makes life a little easier, thanks to the team for compiling and running it I have a 1kzte - 3.0td 4wd 1995 Granvia, it's more or less a Prado or 90 series Landcruiser. I imported it from Japan...
  8. My Land Cruisers

    My Land Cruisers

    Various pictures my toys
  9. My Trips

    My Trips

    My offroad trips
  10. My Build Thread

    My Build Thread

    My build thread
Back
Top