Search results

Yes after turn the key to start engine , check engine flashing but when i'm shorting obd pins check is not flashing

I don’t have the service manual . I noticed that not all of lights flashing . Only abs and Vrc off and airbags .

Yes lights flashed after shorting pins. I will check the ground , maybe it’s clue

Today i called to car services but they haven't intelligent tester for my land cruiser . Idea above about 6 minutes not working . I will be calling to other car services and we will see

Vehicle spec is disabled after chose kdj

I tried. Not working Tech version 13.00.022

I dont see 1kdftv

I connected obd2 and checked connection with obd2, it was correct , and ran techstream . Program not found my vehicle . So I chose manually kdj cause I checked model and this kdj120. But I got error

I’m waiting for delivery

Yes , I charged them before . 12.5v both

Yes i was waiting 40 minutes . Lights still was flashing but they sync so I turned off ignition and got rid of wires but it doesn’t work . Engine won’t start. Also I was trying press the brake when lights was flashing . Sound on but it doesn’t work

Exactly

Ok

Nope . How to do it ?

I m thinking what went wrong. Vehicle was starting normally before change batteries . I guess have to wait for delivery obd2 for Toyota and see all errors

I checked all of them. Each of them looks fine

Yes

I bought new obd2 for Toyota . I’m waiting for delivery. So I tried press unlock and lock button on remote pilot(30s). it doesn’t work. Engine is not starting I tried disconnect +wire on both batteries. It doesn’t work. Engine is not starting I tried open door with key (before I locked door...

I can only lock with key

Ok guys I tried like tony said but i cannot open my car with key. Key not turn right . Only I can lock door with key. I connected obd2 and tried to connect but ecu not want to . See image I tried connect obd2 with my bmw and works fine so I don’t know what is going on with land cruiser.

Ok I’m trying tomorrow

Max time was 10-15s starting engine

Like on video Yes its my vehicle

I did pump for a while and after it was hard to pump

I done it before start engine

I done exactly what you wrote Still nothing My device obd2 not works with Toyota so I can’t check engine errors codes but I recorded videos starting engine. On the first video I start engine first master key On The second video I put the second master key

Ok . I’m trying tomorrow

I used booster power to start. Still nothing

thereabout. Seller checked it out for me. Not a big diffrence

i'm trying tomorrow

95ah 850a

How can I do it ? Reset the immo ?

yes fuel comes in and out I will try to get the engine errors codes. Do you know how to do it ? Obd2 interface?

Fuel filter also is fine I have checked it

Before the battery change everything works fine. I checked fuses each of them is good. Last time it was a few days before change. Batteries ran out and Car has not electricity so I changed them . Radio , windows etc works fine but engine won’t start. Batteries are connected properly

Do you mean engine error codes ? I don’t have computer with software for it. if this helps you, I unscrew the screw from the injection pump and the fuel does not come out of it when starting the engine

The Ground is ok Yes immo light go out. I changed cause the both batteries ran out. i had batteries for a few years

12.5V on each

Hi I have problem with start engine. Everything looks good with electric stuff and starter is working but car won’t start. I have a few keys , two masters and one subkey. When I used subkey immo indicator light is not showing. That same is happening for first master key but when I used second...