Search results

I'd not go that far, surely you could just pick the icing off the cake? :p

Yeah just wondered, Seems there are 2 basic trains of though with the rivet counters, one is Gear oil in the hubs and the other is Grease, then there is that Britparts product, which given the general slagging off Britparts gets, I hear very little bad about that particular product.

Good day folks Quick question: Anyone using this product in their swivel joints Britpart swivel housing grease | Britpart - [Leaving Land Cruiser Club] seems popular in the LR community, so instead of packing the joint with Lithium moly grease then assembling, you assemble and then pour in...

Nice truck!

A steering box from a 80 series will fit and offers an improvement over the original.

Hi John, thats great! I'll swing by the yard and pick it up. Really appreciate your generosity with this! Regards Michael

Thats great! as you say, a trimmer could have at it and get it sorted out. I'll message you directly. Cheers Michael

Hi Seats are grey with black/dark grey lines. Thanks!!

Dunt need no gutter EDIC is required however!

As per title Looking for a EDIC relay box for a HJ60, working or not. Anyone got a broken one or a spare for sale? Cheers Michael

Ah yes, I've seen that done also, looks quite smart, but requires surgery on both seats.

Howdy Just wondering what the options are for seat repair, ie the driverside split that most 60s seem to have. A LHD passenger factory seat cover would be sweet. A donor rear seat stripped of its cover would no doubt assist in the repair of many front seats..... I understand some American...

Good to hear a company like klokkerholm is still willing to do a run.

Anyone tried these badboys out? Fit Toyota Land Cruiser HJ60 2H 4.0L Diesel Silicone Radiator &Air Intake Hose | eBay - [Leaving Land Cruiser Club] Lots of nice go fast colours!

OEM Wiper Arms Upgrade Kit for Land Cruiser FJ60 FJ62 - [Leaving Land Cruiser Club] Mid 90s hilux wipers mount okay and are an improvement over the originals.

Came across this DIM12 - LED Dimmer, Rotary Potentiometer Controlled, PWM, 12V 24V 10A Low Voltage - [Leaving Land Cruiser Club] looks an ideal solution for folk who like to stick LED bulbs everywere possible, never tried the controller myself, just stumbled across it and concluded it could be...

Because I don't currently have a 80 series box to refurbish, hence the WTB ad.

Hi Andy I guess one box has the electrical sensor for changing the amount of power applied to the steering depending on speed, I forget the name for the technology, I was not aware it was split down petrol vs diesel, I had assumed it was a higher trim level/option instalment, good to know for...

Going with Hilux calipers on the front and some decent pads. Andy mind if I ask you here what the difference is between the 80 diesel and petrol steering boxes, I was under impression they were the same, and could be interchanged with the smaller one in a 60 as a upgrade, rather than fill that...

Got a set of rear shoes for the 60 from milner :-D surely they'll be fine on the rear....

Good day. As per title, looking for a 80 series power steering box and pitman arm, its going to be reconditioned before installation so would consider something a bit tired if need be. Cheers! Mike

Ah understood OME it is then I suppose, I do like to buy British where possible.

Just wondering if anyone has tried these? Rear Leaf Spring With Fitting Kit Pair (7 Leaf) for TOYOTA LAND CRUISER 4.0L Diesel - 5 door - 1/1980 to 12/1990 - [Leaving Land Cruiser Club]...

Yeah on 15'' wheels of glory! I suppose I could take the grinder to the calipers if needed, or use spacers on the hubs.

Iwan think these would do the job FRONT BRAKE CALIPER L/H FOR TOYOTA HILUX PICK UP MK5 KDN165 2.5TD (2001-2005) | eBay - [Leaving Land Cruiser Club] ? Cheers

Was it ever established if they would?

Is this a external voltage regulator ?

Would anything from the 80 series fit? I'm not wanting to fab up something that industrial off roadish, I'd prefer to keep the 89 60 GX looking 1st gen soccermam look.

I've been looking for a surround now for a few months, had a ad up here also, no luck, most foreign markets used a different bumper configuration minus the fog lamps, I think 3d printing might be the solution for this one.

Anyone a have a set of sill steps for a HJ60 from 1989? looking for a pair or something that would work from another vehicle any suggestions? See attached picture, the other side is missing...

Ben.......

Hi Ben, might be worth going for a looksee?

Came across on ebay Toyota Landcruiser HJ60 - PAIR ! | eBay - [Leaving Land Cruiser Club] The red one might roar again, not so sure about her sister....

Still looking, someone must have a old bumper with these parts laying around somewhere. Cheers!

Hi Andy/Shane I've come across the ebay fellow never had last time I asked. That flush unit Shane linked might be worth measuring up to see if its a goer! Cheers!

:-(

Good day Anyone got a half decent RHD powersteering box and pitman arm for a 80? preferable in the UK? Cheers.

Anyone know the type of wheels that were mounted on this?

Good day fellows. I'm looking to rebuild a HJ60, currently trying to locate some trim parts, the rear bumper trim is a problem, the outer end caps I can find, but the fog light surround and inner step cap seem impossible to locate (so far) anyone parted out a HJ60 and have these parts...