Search results

have you checked to see if the stepper motor is opening?

I shall shout for Karl !

no cc tv . do I don't I? will check out a few prices

:icon-evil: came out from work today and was presented with the passenger side of my truck missing wheel arches front just hanging on and the rear in bits on the floor ! No note thankyou:angry-screaming: so the question is do I try and get 2 wheel arches not cheap I suppose or do I remove them all??

you also need good plugs and leads. petrol is more forgiving than lpg

hi dont take this the wrong way but do you have gas ? the led gauges are useless. did you starthome on a full tank and what size tank ? I have an 80 on a single point injection I have a 90 ltr tank and get almost 200 miles to a tank about 12 miles to the gallon at 65p a ltr..So may be out of gas.

hi I have a fzj80 I have changed the plunger twice on the starter motor it has now done it again after 3 months wtf .I the put a jumper across the starter bingo started .so is it the starter or a dodgy connection or the ignition barrel????? I have just cut in to the trigger wire connected a...

thanks shayne and chadr . Only thing with copper pipe would it react with the aluminium head ??

Sorry I did mean following the existing root of the old pipe work shielding them a bit from exhaust.

Does this sound stupid or do you think you could replace the pipes from the engine bay to the rear blower heater under the front seat with domestic heating plastic pipe (hep20 or similar with pushfit or compression joints????????????/

I replaced ecu under the gear leaver cover . bingo light goes out when it should .second for £40 . mine just oneday decided not to go out . 10 MIN JOB

perfic!

:pray:Hi does anyone know if the 1998 colorado front leather electric seats would fit ?? If not do you think the leather seat covers could replace the ones on the fj??? thank you!

Sorry havent made my self clear! dip beam works. High beam does not. high beam light on dash does not work . high beam relay clicks when high beam is asked for. so is it the steering column stalk or the relay ??does the dash light work by its self or does it come from the relay? Headlight...

Does anyone have any ideas as to wether it is the relay or switch??

mine gave up the ghost last night .fuses ok ! Now the main beam light on the dash does not come on .Is this because the steering colum switch is us or does it only come on if the main head lamp relay is working ?? if so then relay is naff .there is 12v to the relay connection on 2 connections...

Hello doing a bit of Hijacking ! mine gave up the ghost last night .fuses ok ! Now the main beam light on the dash does not come on .Is this because the steering colum switch is us or does it only come on if the main head lamp relay is working ?? if so then relay is naff .there is 12v to the...

Sorry I have the srs light on !

Hello does any one know what this diagnoses flash code 31 means. thanks in antisipation

Hello my air bag light srs light is on .the flash code is 31 can anyone help ? is it the srs modulator ecu or something else ?? thanks :think:

Hello probably been done to death .rear was working yesterday but not today :(. cdl locks shows abs light ,rear light flashes ,front locks! Is there any thing I should be looking at first before I tear down the actuator and then have fun putting it back together! position sensor,do the have...

what about Ian Rubie! He got mine!:icon-biggrin:

hi now I have head off and bought another all polished and ported with matching inlet manifold. what else should i replace now i have space to work .phh upgrade. heater hoses and cooling hoses? any other ideas would be greatly recieved thanks

thanks og head now off and will be going off tomorrow to see wether or not warped.

both ! do I skim off or get another head. I have seen one all skimmed valves in etc ? is between £700 to a 1000 about right for the whole job?

Hi how much to skim a fzj80 4.5 head? head gasket blown

thank you yes managed with the right knuckle joint and took out underneath with a little help from the wheel arch .new plunger and contacts bit of a pig to get back though but starts like a dream .

Hello please can someone tell me the easy way to remove a starter motor from a fzj 80 ! removed rear bolt just can,t get to top bolt by solenoid. do I remove dip stick or goin through wheel arch ??????????/ please help :oops:

Recieved this morning! thank you again Navman :clap: alex

Just got in from work and measured up in pouring rain! spot on thank you ! :dance:

Thank you!

thankyou Rob and Silvercruiser I shall post a piccy if nivamans are not the right ones

thank you nivapilot that would be brilliant ! they should have two bolt holes about 50mm apart on the side that is not connected to chassie .thanks again how many beer tokens ??

I HAVE BEEN GIVEN A BULL BAR FOR AN FJ80 Standard Toyota I think wrap around. Is there supposed to be a fitting kit to bolt to chassie? If so where can I get one? Thank you

realy odd it is now running fine on both fuels wierd ! yyyyyyyyyyy?

cheers will find a post i hope!

Hi john Im running on petrol at the mo as have not got to lpg pump yet so no lpg on board and is a manual switch over . it is a single point system ! has run fine b4 on petrol but now starts fine a slight bit lumpy. no loss of water in cooling system or pressure build up so hopfully not cyl...

Hi being abit lazy sorry ! or should I ask on Ih8mud? Have a 95 fzj80 4.5ltr. It runs fine on LPG but has just started to have a major lack of power when accelerating until you floor it it then kicks down and pulls like a train then you back off and it starts all over again but not all but most...

Hi my linkage on the centre oo the axcel was seized and on releasing the hand brake ,still kept the os pads rubbing .tryed to free to no joy the realised if I cracked the bolt holding this linkage in place it moves so when the hand brake is on it is on and when released there is no sticking of...

thank you thank you thank you :dance:

sorry for being a bit thick but could someone please tell me if the front interior light above the dash is supposed to come on when you open the door?? Or only when you use the switch as it only seems to have to positions on the light switch ! thank you from a rather bemused person :oops: