Recent content by Johan Bakker

Picture 1 Picture 2 Picture 3 Hi Jon I think I have posted the pictures correctly. The driver pin in picture 1 connects to the fitting in picture 3. And the picture 3 connects to the transfer case fitting. After removing the tail piece of the transfer case, I found the pin and black...

Hi Jon I hope this link works, its the first time I'm attempting to use photobucket. Does that black spacer fit in the speedo connection? And if it does, which way round does it go, small or big side first? Regards Johan

Hi Jon. I have stripped the back of the transfer case off and removed the VC coupling. On my transfer case the is no earth wire, what are the implications of this? I did not look at the web link and where I should of pulled the speedo cable off, I unscrewed the bottom part. Theres a small pin...

Hi guys, Let me start at the beginning i bought a 97vx limited edition diesel 4.2 jap spec Landcruiser with HTFE motor. When I bought the Landcruiser if you turn sharp it felt as though you got 4x4 windup. While driving the gearbox tunnel got quiet hot. I used the LC for fishing and used to ride...

Hi guys, I have a problem, my tc will only lockup when the landcruiser is cold. My landcruiser is a 80vx diesel htfe.Will this make a big difference to diesel consumtion when driving in overdrive with tc not lockedup? Why should warm oil make a difference to tc? Look forward to reading your...