Bullet Proof
New Member
- Joined
- Jan 6, 2015
- Messages
- 26
- Country Flag
Hi folks I am just finishing up a full Australian Toyota FJ45 restoration. I am now getting ready to installing the factory PTO winch but to complete this I need a few parts.
The parts needed are the drive shafts with hangars and the PTO gearbox. The gearbox needed is of the 1981 and newer derived form the split case trans.
It has the bolt pattern straight across from each other compared to the older gearbox where they were offset from each other.
If you have one in your old box of parts and not needed please consider helping fellow builder out if possible. I will also be interested in any other PTO parts you may have to offer.
Please contact this post with information and I will responded ASAP.
Truck is in the US now.
Cheers



The parts needed are the drive shafts with hangars and the PTO gearbox. The gearbox needed is of the 1981 and newer derived form the split case trans.
It has the bolt pattern straight across from each other compared to the older gearbox where they were offset from each other.
If you have one in your old box of parts and not needed please consider helping fellow builder out if possible. I will also be interested in any other PTO parts you may have to offer.
Please contact this post with information and I will responded ASAP.
Truck is in the US now.
Cheers



Last edited: