Search results

Thank you @BobMurphy reallly really appreciate your help with this! :grinning: I really hope I don’t fit it wrong I don’t want to fit them metal wedges and clips wrong i I haven’t removed the selector shafts from the transfer case, should I remove them before refitting that shaft with the...

Also I’m struggling to keep the bronze piece on the end.. if it’s meant too, it just falls off if I try slide it on:confused:

Well I think I did it? :coldsweat: :tearsofjoy: Over an hour.. I don’t think I could ever do that again.. I’ve said some swear words in the time it took me hahah does it just slide on till the clips reach it? Or am I completely going the wrong way doing this haha

Bit more of an update, correct bearing sorted from another local bearing supplier, so that’s one thing sorted! new bearings all pressed on.. now the hard bit, rebuilding it :tearsofjoy: :tearsofjoy: @BobMurphy them little clips that slot in the syncro you mentioned... most stressful thing...

Thank you @BobMurphy that gear seems fine and the insides are all good so I think I was lucky with just needing bearing and chain! I’ve had a bit of an issue with the bearings, all have been correct other than the one on the other shaft going to the front prop, I’ve been supplied one which is...

Thanks @Shayne and @BobMurphy really appreciate your help and time! ive managed to get the other flange nut off, took 15 seconds if that with a good cordless impact gun so I think I’ll have to invest in one :tearsofjoy: stupidly messed with the other shaft with the gears on and pulled it...

Couldn’t find anything on where the balls go in the case Shayne and the thread made by @BobMurphy tge photos don’t work anymore which is a shame :tearsofjoy: my new chain has arrived and I’m getting a neighbour to try use a good buzz gun to get the Front prop flange bolt off as I’ve snapped 2...

I’ve ordered a new chain already, I’ll have a play with the old one or if your in the north west your welcome to have the old one?:tearsofjoy: hopefully I can get the other pinion bolt off and then try get a new bearing, hopefully next week she’ll be back together then it’s brakes and a lift...

Oh dear:coldsweat::tearsofjoy: I’m worried ones fell out a bearing now hahah I was looking at the chain but it looks like a bit of work to remove links.. I was tempted to do that as I love a cheap fix haha The pins look hammered flat either side so I’m not sure how I’d go about knocking a pin...

Thank you haha I didn’t think I’d get this far :tearsofjoy: glad it’s confirmed for you mate! I stupidly never loosened the front prop shaft flange? (Don’t know what there called) and need to remove that side totake the bearing shop and see if they can match the bearing as there’s side to side...

Got case off an teeth on gears look okay? Chain looks very loose an a bit of play going to the gear for front prop shaft also where does the ball I found go hahah there was 2 of them

Guessing my chain is slack? I can Nearly lift it off the gear

Well I dried removing one of the pinion bolts today... Not a chance haha I managed to bend the tab out thinking that it’ll be easy but I broke my breaker bar so I’m hoping if I grab the compressor and buzz gun tomorrow it’ll come off ;) pointless post but hopefully tomorrow brings abit more...

Sounds similar to my transfer case problem.. started out like that then gradually ended up constantly clunking with any power

Thank you for the quick reply Chris! That’s great thank you! I was going to just what you said but was worried the force from it being so tight might mash the gears up hahah I’ll try it with the box locked first save me the hassle of getting the compressor haha I’ll be sure to post pics and...

Little update/beg for help haha going to attempt to take the cover off the transfer case as I don’t have a good jack to take the transfer case off completely while it’s on the drive, so want to attempt it on the car. to remove the pinion bolts? I’ve saw in shaynes thread that you have made a...

I just thought to check the chain while it’s on as it saves trying to remove the whole thing in case it turns out it’s okay haha that looks very confusing I think I’m biting off more than I can chew thinking of changing the chain an sprockets myself hahah Hahah that sounds like me, I don’t...

Dropped the trader box oil today and there was no metal filings on the plug or in the oil that I could see, it came out brown so it wasn’t too healthy haha. the pinion that the front prop bolts too on the transfer case feels like it has play? It feels as though I can move the actual...

Thanks again for the reply, really appreciate all your info! sounds very similar to this : I’m not sure how to remove the transfer case hahah do you think it’s do able for someone with basic skills? I can change alternators and belts, breaks etc but never done anything this big hahah

Thanks again Shayne, I agree I think checking everything is worth while, I’m going to be replacing anything needed once I’ve found the clicking issue, new suspension and bushes all round and she should be all good for the next mot! can I just ask, is yours making just one clunk when the clutch...

I’ll get the new UJ’s fitted and give it a try! No harm in trying as I have them in the cupboard ready haha I’ve tried replacing the oil but unfortunately it still made the noise I’ve removed the front prop which has completely stopped the noise.. would this rule out a damaged front cv axle/s...

Thank you so much for the help Shayne, really appreciate it, I’m going to strip the cv joints off and check the noise isn’t coming from them, worth a try before spending out haha. My front prop shaft that I removed has a seized UJ which I’m sure was free and moving when I took it off. Where it...

Thanks for the replies everyone, I’ve read though that thread Shane, I’ll check my front diff pinion and see how much play there is. Mines not a bang/ thud. It’s more of a snap/twang noise, like when a mud tyre catches your arch liner but a metallic version. It’s quite hard to describe but it’s...

Hi everyone my transfer box/case started clunking a while back, sounded awful under acceleration, would make a fast clunk clunk clunk when ever I accelerated, only way I can really describe it is like a ratchet clicking/spinning haha. Removed front prop an noise went, bought a daily car and my...

Bump if anyone knows of any breakers or if anyone is breaking on cheap please let me know

My transfer case recently started clunking and removed the front prop shaft and drove it daily with HL until I bought a daily car till it’s fixed, mines on mud tyres and in the wet on a round about it likes to kick out but it wascompletely fine otherwise

Is that the 3.0 diesel? If so that’s exactly what I’m after! How much mate? Thank you!

Sorry Trevor for the slow reply, I need the full unit, mines started clunking really badly

Hi does anyone have or know of a Colorado transfer case for sale or anyone breaking one?

Sorry I’ll still get them im just worried about the loud clunk, I don’t know if it’s something really expensive so ideally wanted to try figure out what could cause it and go from there before spending a few hundred on bushes haha mill try the upper and lower control arm bushes fist and see if...

Thank you! That sounds reassuring! The transfer case can be lifted slightly from underneath, could them rubbers being worn cause it as well or most likely arms?

Hi everyone, I came off a muddy track today and heard a bang which I thought was a stone hitting my arch. Drove into Tesco and pulling into a space heard a loud bang and people looked over so must’ve been loud outside haha. Then on my way home, setting off from some traffic light it done it...