80 series compressor nose

[warrenpfo]

My Bearing went which took out the retaining clip which took out the belt and in the process took 1mm off the shaft.

If anyone has a buggered compressor lying around i only need the front cover.

Let me know

Thanks

 

[frank rabbets]

Same thing happened to mine. Terrible play between the nose tube and bearing and in pulling the bearing off managed to snap the front of the nose off with the circlip (FOOL). I managed to take belt off an centralise the bearing and use loctite. Even without the circlip it worked fine. Did not even have to depresurise the system.

 

[warrenpfo]

Cheers Frank but my 1mm has come off the circumference of the nose and no the end not sure lock tight will fix that. I was thinking to shim it but lets wait and see.