Had mine for a few years and it has come in handy. I do find it a pain to use just to check tyre pressures as it takes just that little bit too long to screw on then remove the valve core to get a pressure reading so i still carry a push on digital one for quick checks.
Oh and whilst im thinking don't use any form of lubrication on the little valve core remover shaft as mine was quite stiff to move up and down so thought it a good idea to put a very light smear of red rubber grease on it.......bad idea as air blew straight past the seals. It was solved by cleaning off all the grease but i think its supposed to be stiff.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.