My hazard light question.

[tony rodaway]

Hello guys I have made a change to my dashboard regarding my stereo.
I have a 2014 invincible model and have changed my stereo and aircon control panel.
My old stereo had the hazard lights attached now the new stereo doesn't but the aircon console does.
My oem loom going from my oem aircon unit has the same plug as the new one.
Only difference is 1 brown wire on the new aircon unit that my old loom does not have.
How do I get my hazards to work from my new console unit.
My hazard plug has 4 wires but not sure what colour to connect to the brown wire .
I don't want to blow the unit or a fuse so any information would be appreciated.

 

[felix2566]

My guess would be what ever loom connector you have connected your new stuff to, that used to supply the hazard switch will have the wire in it you need.

Might be a bit hard now it's all fitted, but it might be the only way.

Plus wiring diagram for that part of the car. Not sure if they are available in the resource section of this forum.