Hello mate,Hi everyone, looking to upgrade my standard exhaust to a 3" stainless if anyone can point me in the right direction.
Might possibly fabricate my own so may be looking for a downpipe with flange.
Cheers
That's what I did and it worked out well.
Thanks lad, I'll check out the guys in Enniskillen for sureHello mate,
Gutted to say that i just recently threw away my old standard downpipe and fitted a new one from Roughtrax...
Was sat on the drive for months too, until i got a skip and hoyed it in.
However, if you're ok to wait 3 weeks, (I'm away working atm) i do have a replacement turbo outlet elbow which has the triangular flange.
If helpful, i can measure it up and send you precise dimensions and the profile of the seal ring rebate etc.
If you're anywhere near Killybegs, Mooney Boats have a CNC laser cutter - and i know from personal experience that they're a great bunch of lads - and will profile you out what you need for not a lot or a bit of beer cash.
May not be done while you wait - but it'll be precise.
** also - there's GT Exhausts in Enniskillen, who supply all sizes of high grade thin wall tube, slip on flanges and also offer a bending service if required.
Thanks AndyDon’t think Trevor’s still doing them, not sure but will see him at the meet at the weekend no doubt
Yep - Xforce 3" exhaust cost me 500 ex. vat delivered to the UK, and I am pleased with the end result. The performance difference from the factory exhaust is noticeable - easily the best mod I have done. Quality seems good - although I have no experience with other SS exhausts - presumably more expensive exhausts (Torquit or legendex etc.) are better - but I also can't afford shipping for these! For something that you can buy in the UK, it is certainly worth a closer look. Only been on the car for about 6 months now - perhaps others can provide a longer-term review.Has anyone bought the XFORCE 3" system and what's the quality like.
Seems very reasonable
Any videos of the exhaust making some noise?Yep - Xforce 3" exhaust cost me 500 ex. vat delivered to the UK, and I am pleased with the end result. The performance difference from the factory exhaust is noticeable - easily the best mod I have done. Quality seems good - although I have no experience with other SS exhausts - presumably more expensive exhausts (Torquit or legendex etc.) are better - but I also can't afford shipping for these! For something that you can buy in the UK, it is certainly worth a closer look. Only been on the car for about 6 months now - perhaps others can provide a longer-term
Can't view any of these chey!From OFM some pictures of an installed X Force ...... rear section looks a little clumsy and vulnerable...
Preview attachment 20231019_171656_resized.jpg
Preview attachment 20231019_171708_resized.jpg
Preview attachment 20231019_171729_resized.jpg
Preview attachment 20231019_171827_resized.jpg
20231019_171827_resized.jpg
1.3 MB
20231019_171729_resized.jpg
1.4 MB
20231019_171708_resized.jpg
1.3 MB
20231019_171656_resized.jpg
1.4 MB
Neither can I...... ;-)Can't view any of these chey!