Declan
Active Member
- Joined
- Apr 25, 2017
- Messages
- 97
- Country Flag
So I have this for about 4-5 years and only getting some motivation to start it now ![Tears of Joy :tearsofjoy: :tearsofjoy:](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
It's a 12 valve manual, diff locks, disk brake rear axle.
As you can see from the pictures below the body has seen better days, got a small smack on the o/f corner, rust under the rear window and some in the n/r sill. Underneath is rust free.
Everything perishable underneath is going to be replaced, bushes, disks & pads etc
Front axle needs a rebuild so going to remove it then strip, sandblast, repaint it and put it all back together.
Silmilar will be done with the rear axle except for the rebuild.
Here's a few pictures anyway so ye get an idea!
It's a 12 valve manual, diff locks, disk brake rear axle.
As you can see from the pictures below the body has seen better days, got a small smack on the o/f corner, rust under the rear window and some in the n/r sill. Underneath is rust free.
Everything perishable underneath is going to be replaced, bushes, disks & pads etc
Front axle needs a rebuild so going to remove it then strip, sandblast, repaint it and put it all back together.
Silmilar will be done with the rear axle except for the rebuild.
Here's a few pictures anyway so ye get an idea!