resko
New Member
- Joined
- May 3, 2023
- Messages
- 16
- Country Flag
Hi guys,
Preparing to make my own complete 3" dump pipe + exhaust next week and want to see if anyone on here has experience.
Personally the dump pipe seems to concern me the most because of the Awkward oval shape on the turbo.
I ordered a flange on ebay and would like to see if people have any tips or tricks to smoothly go from this shape to a round 3" pipe.
Thinking about buying this oval to round 3" piece and then fabricate it a bit to fit the little straight section on the oval flange.
Also should the flexi piece be on the dump pipe or can it be on the next piece of the exhaust.
Next im in doubt of either going to the back of the car or making it a side pipe exhaust.
I would go straight all the way with no dampers. Can always fit one later if it would be too loud or annoying.
All tips&tricks are welcome!
Thanks.
Preparing to make my own complete 3" dump pipe + exhaust next week and want to see if anyone on here has experience.
Personally the dump pipe seems to concern me the most because of the Awkward oval shape on the turbo.
I ordered a flange on ebay and would like to see if people have any tips or tricks to smoothly go from this shape to a round 3" pipe.
Thinking about buying this oval to round 3" piece and then fabricate it a bit to fit the little straight section on the oval flange.
Also should the flexi piece be on the dump pipe or can it be on the next piece of the exhaust.
Next im in doubt of either going to the back of the car or making it a side pipe exhaust.
I would go straight all the way with no dampers. Can always fit one later if it would be too loud or annoying.
All tips&tricks are welcome!
Thanks.