Recent content by Simon5030

Same just happened to me, replaced front shocks and steering rack, LC5 2006, all checked and only seem to get the problem on a RH bend Since replaced rear shockers all rear bushes and drop links, checked all shock actuators but no changes Got me stumped

on its way

Sent you a link :dance:

Sent you a link

Sent you a link :handgestures-finge:

Hi Guys, its been a while and thats because my 120 has been running like a dream with a little TLC! Alas thats where the dream ended! I am getting a judder from what i think is the transfer box, this only occurs between 1000 and 1500 rpm, its most prominent when driving on the flat at 40mph and...

Rob, Thanks, mine is all manual calculation but only getting 22/gal work and back, just wading through ECU data looking for a needle in a haystack, all injectors are within tolerance and quite a few of the other related settings Will keep looking Cheers

Hi Rob, About to tackle mine at some point this winter, have you noticed any benefits on fuel economy Struggling to get more than 22/gal and as we all know fuel is not cheap! Thanks

All up to date

Scottish, If you let me have your email i can send you a link if you would still like a manual? Simon

Updated

updated

I had to replace the rear diff bearing on my last 120, took a while to pin the noise down and some reluctance to do the job but loved it once i got stuck in! Interestingly enough i had front wheel bearing go and i was adamant i knew what side it was and got a mechanic to check, replaced the...

updated

Its a bit subjective but i will definitely continue, MOT on Sat so it will be interesting to see how the emmisions are Key point seems to be the quality of the diesel used in the first place, if you are using a reasonable brand then there may be little or no difference. I still get a rattle and...